24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

MAP SENSER ON 24 VALVE

Old Feb 1, 2003 | 12:12 AM
  #1  
BAD HABIT's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 103
Likes: 0
From: Houston TX. area
MAP SENSER ON 24 VALVE

Is there a MAP senser on 98" 24 valve and if so where is it located!!!. Low MPG. Maybe low power. Nothing else to compare by..... HELP>
Reply
Old Feb 1, 2003 | 01:04 AM
  #2  
BAD HABIT's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 103
Likes: 0
From: Houston TX. area
Re:MAP SENSER ON 24 VALVE

Lost 3 hours on phone today about this subject. 2.5 hours here. Whats up with this. Learned that from my kid. Going to bed. No help here today. Somebody's got to know something. Try again tomorrow.
Reply
Old Feb 1, 2003 | 10:07 AM
  #3  
Monty's Avatar
Administrator
 
Joined: Sep 2001
Posts: 1,440
Likes: 2
From: Mustang, OK
Re:MAP SENSER ON 24 VALVE

See if this helps.

Be sure to take the IAT sensor out and clean it up with some brake cleaner or carb cleaner. This sensor has been known to cause low mpg and power problems when it becomes dirty.
Reply
Old Feb 1, 2003 | 10:30 AM
  #4  
BAD HABIT's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 103
Likes: 0
From: Houston TX. area
Re:MAP SENSER ON 24 VALVE

Thanks OKIEBRONCRIDER. Going to check MAP senser now. I check IAT bout once a month.
Reply
Old Feb 1, 2003 | 03:52 PM
  #5  
willyslover's Avatar
Registered User
 
Joined: Jun 2002
Posts: 51
Likes: 0
From: Twain Harte, Ca. 4000'
Re:MAP SENSER ON 24 VALVE

you didn't say if you found it or not...it's behind the fuel filter about a few inches and a little lower on the 98.5 [towards the driver]
Reply
Old Feb 1, 2003 | 05:02 PM
  #6  
RAM4U2NV's Avatar
Registered User
 
Joined: Dec 2001
Posts: 7
Likes: 0
From: CONCORD, NORTH CAROLINA
Re:MAP SENSER ON 24 VALVE

I have a 2000 model and my check engine light came on. so I take it to the dealer and they said it was due to the map sensor not getting a reading. My question is my check engine light is now off (not reset by the dealer) and the truck now seems to be running alright. Do I still need to replace the map sensor or not. <br> Thanks Doug
Reply
Old Feb 2, 2003 | 11:16 AM
  #7  
Alan_Reagan's Avatar
Registered User
 
Joined: Aug 2001
Posts: 269
Likes: 0
From: Kathleen, GA
Re:MAP SENSER ON 24 VALVE

[quote author=GOOD_LOOKIN_RAM link=board=4;threadid=10367;start=0#99343 date=1044140532]<br>I have a 2000 model and my check engine light came on. so I take it to the dealer and they said it was due to the map sensor not getting a reading. My question is my check engine light is now off (not reset by the dealer) and the truck now seems to be running alright. Do I still need to replace the map sensor or not. <br> Thanks Doug<br>[/quote]<br><br>Maybe not. A lot of times a fueling box will cause the MAP error. If the dealer reset and all is OK it was probably the box or you could have had a dirty connection at the MAP.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Crazyhorse
HELP!
2
Nov 24, 2007 04:07 PM
jd4230
HELP!
1
Sep 28, 2006 07:12 PM
muddslinger
24 Valve Engine and Drivetrain
4
Jul 28, 2006 11:44 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:18 PM.