2002, 5 speed, 2wd.
97,000 miles
The truck runs great, but every once in a while, limp clutch pedal?
Pump it, back to normal?
What could it be?
No loss of fluid?
Master cylinder, on the clutch, is the only thing I can think of.
Thanks, in advance.

 

Hyd clutch assy is failing. Recomend replace as one piece assy from Dodge. Can get a aftermarket from Southbend clutch with slightlly larger cylinder for a few bucks more. Don't try replacing just one piece. Hard to bleed and may get wrong part. JMHO

 

Dozer, is this an internal part?
I was going to replace the master cylinder and the slave, all exposed.
Thanks.

 

He's talking about the master/slave combo that Dodge sells. You get the master, slave, reservoir, plumbing... all pre-bled and ready to go. It's about $200 from Dodge. South Bend Clutch sells a similar combo for a little more money.

Dave

 

Thanks guys, I will go with the combo.
A little more expensive, here in the great white north.
Will let you know what happens.

 

Call Harry at Peak Diesel, he will have the Southbend parts. I bet he will be less than what the Dealer will be.