clutch
05-19-2007, 07:28 AM
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Indiana
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
clutch
my clutch finally slipped with a 20 foot steel goose neck horse trailer unloaded what is some of yalls past experence with this it is not toast yet how long can i get it to last
05-19-2007, 09:41 AM
#3
Registered User
, but once it
if you still have a stock clutch with your mod's you are doing good , but you are in line for a sbc upgrade ....... go for it. do it at you conveniance, not after you have to get towed
05-19-2007, 04:51 PM
#4
Banned
If you want to make the clutch last....good rule of thumb is to never hammer down from a dead stop. The stock clutch pressure plate doesn't reach full clamping force until around 1500rpm [give or take]. Try easing into the throttle gradually.
Thread
Thread Starter
Forum
Replies
Last Post
WACTD
3rd Gen Engine and Drivetrain -> 2003-2007
7
07-25-2006 11:41 AM
Fishbait
24 Valve Engine and Drivetrain
10
06-06-2006 12:34 PM