24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!
View Poll Results: What Style Lift Pump are you running
Holley blue, red, black
10.56%
Fass
25.35%
Airdog
11.97%
Airtex
4.58%
Raptor
3.17%
Carter
20.77%
Other
9.86%
Fuel Boss/MITUSA/RASP
1.76%
Walbro
11.97%
Voters: 284. You may not vote on this poll

Battle of the LIft Pumps! (Poll Included)

Thread Tools
 
Search this Thread
 
Old Feb 24, 2008 | 08:52 PM
  #1  
91rangerturbo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 839
Likes: 0
From: Greenville, IN
Battle of the Lift Pumps! (Poll Included)

Everyone please chime in. And share your experiences.

I am running a Holley Blue Pump
I am getting 13psi @ idle and dropping down to 7psi under WOT with no trailer.
NO STRECHED SPRING..

I am going to purchase a pump more suited for the job.

I am looking at all of the options for the dodge trucks so far i have seen people running the following pumps. If i leave one out please let me know.
Holley blue, black, red
Fass
Airdog
Airtex
Carter
Raptor
Reply
Old Feb 24, 2008 | 08:59 PM
  #2  
clowndodge01's Avatar
Registered User
 
Joined: Sep 2007
Posts: 216
Likes: 0
From: Martinsburg, WV
mine idles at 20 and 17 under WOT
Reply
Old Feb 24, 2008 | 09:01 PM
  #3  
91rangerturbo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 839
Likes: 0
From: Greenville, IN
thanks for your vote. I am trying to make this a all-inclusive poll is there any other pumps that are available?
Reply
Old Feb 24, 2008 | 09:04 PM
  #4  
clowndodge01's Avatar
Registered User
 
Joined: Sep 2007
Posts: 216
Likes: 0
From: Martinsburg, WV
i think you prolly hit them all
Reply
Old Feb 24, 2008 | 09:17 PM
  #5  
marine4life's Avatar
Registered User
 
Joined: Feb 2006
Posts: 454
Likes: 0
From: Denver CO
I've had a great experience so far with the FASS. On Edge 5, I can pull it down to 16psi and no lower, it idles at 18. I love it.
Reply
Old Feb 24, 2008 | 09:19 PM
  #6  
mx684's Avatar
Registered User
 
Joined: Oct 2006
Posts: 449
Likes: 0
From: Springfield, Missouri
mine with BD.....21 idle, 15 wot
Reply
Old Feb 24, 2008 | 09:20 PM
  #7  
65pacecar's Avatar
Registered User
 
Joined: Jun 2005
Posts: 140
Likes: 0
Originally Posted by clowndodge01
i think you prolly hit them all

Missing the Fuel Boss/MITUSA/RASP type of Mechanical Pump set-up. I have a fuel boss waiting installation, they seem to have nice solid numbers that actually increase with RPM/Load.
Reply
Old Feb 24, 2008 | 09:52 PM
  #8  
torquefan's Avatar
Registered User
 
Joined: Sep 2003
Posts: 4,449
Likes: 47
From: Calgary, Alberta
Walbro?
.....
Reply
Old Feb 24, 2008 | 10:02 PM
  #9  
rebal's Avatar
Registered User
 
Joined: Jan 2005
Posts: 3,899
Likes: 3
From: Yuba city Kalifornia
fass good pressure but noisy
Reply
Old Feb 24, 2008 | 10:15 PM
  #10  
emoryemt-i's Avatar
Registered User
 
Joined: Feb 2006
Posts: 159
Likes: 0
From: Richlands, North Carolina
walbro

where is the walbro
Reply
Old Feb 24, 2008 | 10:20 PM
  #11  
mercedeezel's Avatar
Registered User
 
Joined: Jan 2008
Posts: 24
Likes: 0
From: Houston, TX
Thumbs up New Style Airtex

New style Airtex. 17psi @ idle and 12psi @ wot.
Reply
Old Feb 24, 2008 | 10:25 PM
  #12  
Night Rider's Avatar
Registered User
 
Joined: Jan 2008
Posts: 106
Likes: 0
From: Nanjemoy, Md
Ive got the holley blue(actualy the pro-comp version, cost around $50 instead of $120) runs at 28psi and with +125 injectors can't pull it down below 24psi. My whole setup including the parts for the line kit I did only cost $75.
Reply
Old Feb 24, 2008 | 10:32 PM
  #13  
duckhunter_1100's Avatar
Registered User
 
Joined: Nov 2007
Posts: 32
Likes: 0
From: A spot in the thumb of Michigan
I love my Walbro pump. 18psi at idle and 15 or so wot.
Reply
Old Feb 25, 2008 | 06:16 AM
  #14  
91rangerturbo's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 839
Likes: 0
From: Greenville, IN
Originally Posted by torquefan
Walbro?
.....
It was late and i know i forgot that one. And i can't edit the poll to make the nessacary changes. If you have a walbro or Fuel Boss/MITUSA/RASP type of Mechanical Pump set-up. Put it in other and just make a post saying which style.
Reply
Old Feb 25, 2008 | 07:08 AM
  #15  
clowndodge01's Avatar
Registered User
 
Joined: Sep 2007
Posts: 216
Likes: 0
From: Martinsburg, WV
hopefully we all know that FASS & AIRDOG are or was designed and owned by the same company right? if you dont know well they were. Its a long story one is noisy one is cheap
Reply



All times are GMT -5. The time now is 11:12 AM.