Weld super singles. Cant seem to make em fit.
#1
Weld super singles. Cant seem to make em fit.
- Okay guys. 1993 w250. I bought a set of 16.5x12 weld super singles last summer for 700 bucks. Just got em polisged a few weeks ago and paid 800 to do that. Now i have 1500 in these wheels. Now these are the first generation super singles im assuming because they require the mag seat lug nut. Well i picked up some lug nuts i thought would fit. I stuck one in the wheel to see if there would be sloppiness in the lug hole and there was!!! So my thread pitch is a 1/2-20. And i cant seem to find any lugs with a bigger shank diameter then i believe it is .680 with a 1/2-20 pitch. Really dont want to get rid of the wheels. Could i got to a 9/16 wheel stud?? What are my options here guys
#2
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,770
Received 1,637 Likes
on
1,112 Posts
Quite a few guys here have upgraded to 9/16" studs. Time consuming, but easily accomplished. Now if you can find the correct lug nuts with 9/16" threads.
The following users liked this post:
mknittle (06-06-2017)
Thread
Thread Starter
Forum
Replies
Last Post
dog rocket
3rd Generation Ram - Non Drivetrain - All Years
10
10-16-2007 01:05 PM
Jus Cruisin
3rd Gen High Performance and Accessories (5.9L Only)
3
11-20-2006 06:22 AM