Turbo upgrade advice.
Intercoolers fine, only driven it once with it on really, didn't really have any numbers before hand, cools a lot quicker and EGTs while driving are down 150-200*F or so unloaded. Boost is only down like 2psi or so.
On my last truck, the 60mm upgrade was great, the sound it makes was worth it to me, that turbo whistle is awesome to say the least. My current rig is going to be a bit more serious than the last one so I am probably going S300 with bigger injectors.
Thanks for all the help
. I've been doing more research and I think I will probably go with the GDS upgrade. I believe it will get the job done. If I decide to go with a different turbo I'll more than likely go with the HX-40. The most I ever tow is a Toyota rockcrawler with toyota axles about 5-6 times a year. If I notice the EGT's getting a little on the warm side I could back out the fuel screw a bit. I also probably need to upgrade the down pipe to 4''. As the truck is now I can keep the EGT's between 700-800 degrees with my post pyro.
. I've been doing more research and I think I will probably go with the GDS upgrade. I believe it will get the job done. If I decide to go with a different turbo I'll more than likely go with the HX-40. The most I ever tow is a Toyota rockcrawler with toyota axles about 5-6 times a year. If I notice the EGT's getting a little on the warm side I could back out the fuel screw a bit. I also probably need to upgrade the down pipe to 4''. As the truck is now I can keep the EGT's between 700-800 degrees with my post pyro.
Thread
Thread Starter
Forum
Replies
Last Post
hot_runner58
3rd Gen Engine and Drivetrain -> 2003-2007
1
May 3, 2012 06:36 AM
dodgemaniac
Competition / Pulls / OffRoad
12
Jul 31, 2008 10:15 AM
salad 419
Performance and Accessories 2nd gen only
1
Mar 3, 2007 02:15 PM
LilBigd02
3rd Gen High Performance and Accessories (5.9L Only)
7
Feb 28, 2007 08:31 PM
12valve
3rd Gen High Performance and Accessories (5.9L Only)
14
Feb 22, 2007 09:07 PM





