Newbie Turbo Upgrade Advice needed
03-03-2007, 11:57 AM
#1
Registered User
Thread Starter
Join Date: May 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Newbie Turbo Upgrade Advice needed
I need help choosing a new turbo. Mods are listed in the signature.
The truck is drag raced at least once a month during racing season, daily driven with some towing.
Would like to have the fastest possible ET's/power but without sacraficing too much drivability.
Can't decide between a 62/14 or 64/14.
Also, are there any preferences between the HTT and Phat Shafts?
A quick note. I'm CHEAP, so that is a major factor as well.
Thanks guys.
The truck is drag raced at least once a month during racing season, daily driven with some towing.
Would like to have the fastest possible ET's/power but without sacraficing too much drivability.
Can't decide between a 62/14 or 64/14.
Also, are there any preferences between the HTT and Phat Shafts?
A quick note. I'm CHEAP, so that is a major factor as well.
Thanks guys.
03-03-2007, 02:15 PM
#2
Registered User
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the DTR. I think the 64/14 may be the way to go. Most parts don't work until you put them on. So put your EDGE on and get after it. From the looks of your sig you're not to cheep. All looks like well thought out parts. I think you made real good choices and did not buy a bunch of junk just to save money. Have fun and let us know what you do. Both turbos should work fine.
Thread
Thread Starter
Forum
Replies
Last Post
dodgemaniac
Competition / Pulls / OffRoad
12
07-31-2008 10:15 AM
kcrowe
3rd Gen Engine and Drivetrain -> 2007 and up
20
06-21-2008 08:16 AM
beandrew
3rd Gen High Performance and Accessories (5.9L Only)
2
01-27-2006 08:45 PM
atc250r
Performance and Accessories 2nd gen only
2
12-06-2002 07:14 PM