Silverado bucket seats?
Thread Starter
Registered User
Joined: May 2004
Posts: 48
Likes: 8
From: North Texas
Silverado bucket seats?
Has anybody mounted Silverado bucket seats in a 1st gen? I picked up some seats out of a 2000 Silverado. The bench seat was just to uncomfortable.
Thomas
Thomas
Registered User
Joined: Oct 2004
Posts: 427
Likes: 0
From: Kansas City, MO
They should fit. You'll have to make custom brackets most likely. Its best to use the factory hard points that are welded in. If you drill a hole in a single layer of sheet metal and bolt the seat down expect the seat to tear out in an accident.
Registered User
Joined: May 2009
Posts: 537
Likes: 0
From: Lancaster, Ca.
They used to say Keep Your GM Car All GM...So what's wrong with you?
...now, if I can just get these Supra seats to bolt into my 06....
LOL
When I still had my 91 I found the seat position much more comfortable after installing the bench on some 2" square box-section risers...took a lot of stress off the left shoulder. The seat was too low in relation to the armrest.
...now, if I can just get these Supra seats to bolt into my 06....
LOLWhen I still had my 91 I found the seat position much more comfortable after installing the bench on some 2" square box-section risers...took a lot of stress off the left shoulder. The seat was too low in relation to the armrest.
Thread
Thread Starter
Forum
Replies
Last Post
keith1992
1st Gen. Ram - All Topics
2
Jul 11, 2008 10:48 PM
wizkid
3rd Generation Ram - Non Drivetrain - All Years
7
May 22, 2006 08:43 PM
stucw
3rd Generation Ram - Non Drivetrain - All Years
15
Feb 26, 2006 05:56 PM
jprovence
2nd Gen. Dodge Ram - No Drivetrain
6
Jan 28, 2005 08:19 PM
