Pre-Bent Brake lines
#3
Registered User
I've seen stuff for old cars, restoration type stuff, stainless steel pre-bent. Have yet to see anything for our trucks. I buy brake line by the 25 ft. coil and flare it myself, make whatever I want.
#4
Registered User
I beleive Stainless Steel Brakes corp. will make you lines, I know someone had them... Maybe TDIMARK( he has a red dually for sale here- bottom of page classifieds). Try asking him or they may make them if you ask. They usually need a set of originals from truck to bend in the stock config.
#5
Registered User
I contacted Inlinetube for set at one time and they wanted me to send them my old one`s for a pattern. Long story short....too much $$$$ and hassle so i just bent em up myself.
#6
i second the stainless steal brakes corp, that and i was told by my diesel teacher that a dodge dealer will also have them.
but i would just buy some brake line and bend it myself. however you must make sure you bend them close to what oem was, they were bent that way for a reason.
good luck
but i would just buy some brake line and bend it myself. however you must make sure you bend them close to what oem was, they were bent that way for a reason.
good luck
Thread
Thread Starter
Forum
Replies
Last Post