Pinnion seal - leaking again
#1
Registered User
Thread Starter
Pinnion seal - leaking again . Help and Suggestions
Guys,
I rebearinged my differential/axles a few years ago- and it maybe 10-20,000 miles. I used a Timken diff set on the D70U and had a kent-moore seal installer. To have a new seal surface, I replaced the UJoint-hub. But it is leaking again!!!!
The driveshaft doesn't appear to have any play in the u-joints. Got any ideas to lead to an early failure. Ie - did I do something wrong or am I missing something.
Soliciting advice!
Michael
I rebearinged my differential/axles a few years ago- and it maybe 10-20,000 miles. I used a Timken diff set on the D70U and had a kent-moore seal installer. To have a new seal surface, I replaced the UJoint-hub. But it is leaking again!!!!
The driveshaft doesn't appear to have any play in the u-joints. Got any ideas to lead to an early failure. Ie - did I do something wrong or am I missing something.
Soliciting advice!
Michael
Thread
Thread Starter
Forum
Replies
Last Post
lilsuzuki4x4
4500 / 5500 - Chassis Cab Trucks
9
09-01-2011 01:50 AM
SDHNTR
3rd Gen Engine and Drivetrain -> 2003-2007
17
04-02-2009 10:19 AM
cumminspower79
24 Valve Engine and Drivetrain
1
01-26-2007 06:35 PM
reb0957
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-10-2005 09:57 AM