Part needed for “92 instrument cluster repair
#1
Part needed for “92 instrument cluster repair
PART NEEDED FOR “92 INSTRUMENT CLUSTER REPAIR
We are trying to repair the instrument cluster in my brother’s truck. All the mounting screw areas are broken off. We need a new cluster housing that the Instruments mount in.
I’ve done a patch job with a strip of aluminum on the original housing, but we would like to find a good replacement , without broken mounting screw holes.
(Photo #1) – this part shown is for an old cable driven speedo cluster w/ 12V/ Constant Voltage -powered instruments.
We need the housing for the electronic instruments in the 90/93 model trucks.
We need just the housing part, like the photo, but would buy a complete or partial assembly if that’s what you have to sell. All our instruments are good, and have the “White Face” conversion.
Any help will be appreciated. You can reply to this thread or by PM.
Or phone: 623-606-8941
Thanks,
Jack Dancoe
.
We are trying to repair the instrument cluster in my brother’s truck. All the mounting screw areas are broken off. We need a new cluster housing that the Instruments mount in.
I’ve done a patch job with a strip of aluminum on the original housing, but we would like to find a good replacement , without broken mounting screw holes.
(Photo #1) – this part shown is for an old cable driven speedo cluster w/ 12V/ Constant Voltage -powered instruments.
We need the housing for the electronic instruments in the 90/93 model trucks.
We need just the housing part, like the photo, but would buy a complete or partial assembly if that’s what you have to sell. All our instruments are good, and have the “White Face” conversion.
Any help will be appreciated. You can reply to this thread or by PM.
Or phone: 623-606-8941
Thanks,
Jack Dancoe
.
#3
Registered User
I have a quite a few 1st Gen clusters on a shelf in my shop.
PM if you would like.
PM if you would like.
Thread
Thread Starter
Forum
Replies
Last Post
AK RAM
3rd Gen Engine and Drivetrain -> 2003-2007
1
05-04-2004 05:36 AM