this is a question for all the dd guys, i got a 3250-5k today and the flywheel ring is at the crank side and the single disk on the truck (also a sb) is offset towards the trans and the starter spacer wont work for the starter,did i get the wrong one! i got the hydros done and need a clutch cause we got work but,some in the yard 45miles one way but the majority of it is either west ok or texas and i got the time off this weekend to do the swap so i need help asap please

 

sorry its a 3250-5 not the 5k

 

Looks like you have a Getrag transmission and you got a clutch for the NV4500...I believe South Bend can make you one for the Getrag but you have to specify it when ordering, it isn't a stock item according to my list here.

 

thanks lary ellis i didnt know that,man that aint good

 

Really all you need is a different starter spacer. Not a big deal just give us a call.

Peter

 

i called and talked to ya at 7;47 this mornin(i wrote it on my box lid with my yard boss listenin and watchin then scratchin his head) thanks again peter when should i be seein it im hopein for this weekend,i wana go to wheeler this time to see the rig in action from the mud pit side of things.