Hydro-boost/master cylinder question.
#1
Registered User
Thread Starter
Join Date: Feb 2005
Location: Browns Valley CA
Posts: 763
Likes: 0
Received 0 Likes
on
0 Posts
Hydro-boost/master cylinder question.
Just had a new hydro-boost installed in my 92 and the master cylinder is rubbing the AFC. I can counter bore the holes in the afc cover and use button head bolts but I still need to grind some material off the master cylinder. Anyone venture to guess how thick the material is on the corner shown?
Thanks.
RonA
Thanks.
RonA
#5
Registered User
Thread Starter
Join Date: Feb 2005
Location: Browns Valley CA
Posts: 763
Likes: 0
Received 0 Likes
on
0 Posts
That looks just like my old unit. It was off a 1 ton chevy van, but I don't remember the year. This one is just a tiny bit longer and fatter on the end, making it rub on the afc under engine braking(horrible sound). I think I can skim enough off with a carbide burr to clear the afc and use a different bolt on the cover. The p-pump is a bit longer.
Thread
Thread Starter
Forum
Replies
Last Post
Hercules
2nd Gen. Dodge Ram - No Drivetrain
13
04-09-2013 10:33 PM
93-p-pumper
1st Gen. Ram - All Topics
3
01-09-2013 02:00 PM
Gen414
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-07-2009 11:08 AM
cgmorgan06
3rd Gen Engine and Drivetrain -> 2007 and up
3
11-15-2007 04:02 PM