I'm considering adding a hood stack to my first gen. I've seen 'em on second gens before and like the look - does anyone have a pic of one on a first gen? Thanks.

Chris

 

If you like black soot on your windshield...

 

There's a few pulling video's with some 1st Gen pulling with hood stacks... I think they are pulling with the PPL... One is a DTR memeber...

 

there are several on here with them

 

Nother thread on it here......
https://www.dieseltruckresource.com/...d.php?t=129562

 

Too bad it's not street legal in any state I know of.

 

http://video.thedieselgarage.com/rec...27017b12cf.htm

http://video.thedieselgarage.com/cat...8800c0a02a.htm

http://video.thedieselgarage.com/cat...2b0090424b.htm

http://video.thedieselgarage.com/cat...2401624e19.htm

Sorry.. most of these have the same truck "PowerTrip"... Not that many 1st gen's out there pulling with hood stacks..

 

I can only imagine how LOUD and stinky that has to be. And I don't know of any turbo compressor wheels that like to pump a housing full of water at startup following a long rain when your tin can got blown off the pipe. You would be better off chopping the exhaust at the down pipe support and letting it warm your feet. If you run an elbow out to the side it may be tolerable.

 

Cool - didn't realize Bryan had a hood stack on his truck.

Thanks for all the comments/advice, everyone.

Chris

 

You're going to install a hood stack, aren't you?

 

I'd love a hood stack....but I don't think the Ok Highway Patrol would like it much! If I knew I could get a way with it, I'd for sure get a "salvaged" hood and go to cuttin'. I'd put my stock hood in storage of course. And I'm sure my wife would love to look through the cloud of smoke on those long on-ramps!

 

I had one on mine after the trans swap to try out the trans before I built the 5" the hood was already of so I just turnd my 4" down pipe up with a 5" turn out I had to keep the rain out. It sounded good. cant get pic to load