1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

"honey it just followed me home"

Old Nov 20, 2007 | 03:14 PM
  #1  
farmer0_1's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 912
Likes: 0
From: cornelius oregon
"honey it just followed me home"

ok i was hoping someone here would take this baby home, but no calls. the owner threaten to take it to the crusher and i couldn't take it and I caved in and hauled it home. i hope the man upstairs likes vintage crewcabs because bringing this home at pre xmas is not the greatest idea yet. anyway its here and i will keep it until i finish my 78. has some normal stuff like i said before the cowl cracks and some dings but no rust . has the clutch pedals and the dash and bench seats are there. anyway don't be surprized down the road to see it for sale here on the web page but for now until the smoke clears its going to see a low profile.
Reply
Old Nov 20, 2007 | 04:34 PM
  #2  
TravisDj's Avatar
Registered User
 
Joined: Nov 2006
Posts: 205
Likes: 0
From: Greeneville, TN
I really like that. I wish they had made a 94-98.5 Crew cab. I like the fullsize four door, but also like the body style of mine with the 12 valve.
Reply
Old Nov 20, 2007 | 06:55 PM
  #3  
RumbleFish's Avatar
Registered User
 
Joined: May 2007
Posts: 384
Likes: 0
From: Indiana
If it wold have been closer I'da bought that for my crew instead of selling it. Oregon is a bit of a drive for me.
Reply
Old Nov 20, 2007 | 08:39 PM
  #4  
whereswaldo250's Avatar
Registered User
 
Joined: Apr 2006
Posts: 1,526
Likes: 1
From: Scottsdale, AZ
Sweet looks like a nice upcoming project
Reply
Old Nov 20, 2007 | 09:01 PM
  #5  
farmer0_1's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 912
Likes: 0
From: cornelius oregon
the projects are starting to get assigned a year of completion . this would be around 2010 or 11. sheds are full going to have to sell more hay to get this thing inside.
Reply
Old Nov 20, 2007 | 11:42 PM
  #6  
MikeThomas's Avatar
Registered User
 
Joined: Jan 2007
Posts: 919
Likes: 6
From: Seatac WA
Im lucky not to have the space or I would be neck deep in trucks
Reply
Old Nov 21, 2007 | 09:13 AM
  #7  
JD730's Avatar
Registered User
 
Joined: May 2005
Posts: 2,510
Likes: 1
From: Belvidere, NJ
Originally Posted by farmer0_1
ok i was hoping someone here would take this baby home, but no calls.
If it was half the distance I would have ran out and hauled it in. If it was in Utah I could visit my uncle.

Originally Posted by MikeThomas
Im lucky not to have the space or I would be neck deep in trucks
I already am, so whats another one.
Reply
Old Nov 21, 2007 | 09:51 AM
  #8  
farmer0_1's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 912
Likes: 0
From: cornelius oregon
i will try to tempt you . my neighbor is putting in field tile and he is backfilling with a two banger john deere crawler. for what it cost to go to bozeman mt last week could cost more than 1500 bucks to come out to get a cab. i do understand about the distance. really hard for me to here about all the rusty rigs you guys have to deal with. i still drive my 84 6.2 chev daily never spent a nite in the garage and still no rust even runs original muffler and exhaust pipe
Reply
Old Nov 22, 2007 | 09:00 AM
  #9  
ccab85's Avatar
Registered User
 
Joined: Jan 2007
Posts: 220
Likes: 0
I am with you on that one. I picked up another crew cab and it is sitting in a friends impound lot until I can sneak it home. Had to get rid of 4 (2 left) before I dare bring it home, the wife can see all of my junk from her kitchen window, must work under the cover of darkness.
Reply
Old Apr 11, 2008 | 02:03 AM
  #10  
Alwaysworking's Avatar
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
thats a nice looking cab
Reply
Old Apr 11, 2008 | 08:59 AM
  #11  
farmer0_1's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 912
Likes: 0
From: cornelius oregon
that cab is sitting in trooperthorns shop now. should make short work with no rust issues.
Reply
Old Apr 11, 2008 | 12:12 PM
  #12  
Alwaysworking's Avatar
alwaysonDTR
 
Joined: Dec 2007
Posts: 2,551
Likes: 0
From: Keizer, oregon
thought i seen it in his pictures
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigredbrick
1st Gen. Ram - All Topics
16
Jun 4, 2009 10:07 PM
Lil Dog
ABDTR #5
112
May 4, 2009 10:03 PM
Box5
Performance and Accessories 2nd gen only
13
Sep 2, 2007 06:44 PM
Homestead
Towing and Hauling / RV
18
Aug 20, 2005 12:26 AM
Dieseldude4x4
Other
25
Dec 10, 2004 08:04 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:46 PM.