Finally! A place for my spare tire and more!
#1
Registered User
Thread Starter
Finally! A place for my spare tire and more!
Well Ive been running around without a spare because I was missing all of the junk underneath plus who wants to crawl under a truck when the pavement is 150 degrees here in AZ. I pulled a solution from my jeeping days and decided to take matters into my own hands and build a solution. I used the latching hardware from a H2 Hummer, giving me some sweet d-rings and a ultra smooth latch/hinge. Added a 2x6", 3/16 wall bumper and viola! a full size swing away tire carrier. I have to say its sweeter than I expected!!! Now for a jerry can and a real spare...
#6
Registered User
Looks good. The only negatives that I see is that your bumper no longer protects your tailgate in the event of a rear-ender and you'll have to be careful backing up close to trees, poles, buildings, etc. Good job.
#7
Registered User
Thread Starter
Yeah, if I could only trigger its release in the cab!
As far as rear ending, it would have to be a taller vehicle plus ive seen most bumpers pushed up and into the bed and tailgate because cars go under it! I lifted the rear of my truck up with a hoist in this configuration, couldnt do that with the stock bumper. Trees??? I live in az, the only trees are the ones people plant in their yard!!!
As far as rear ending, it would have to be a taller vehicle plus ive seen most bumpers pushed up and into the bed and tailgate because cars go under it! I lifted the rear of my truck up with a hoist in this configuration, couldnt do that with the stock bumper. Trees??? I live in az, the only trees are the ones people plant in their yard!!!
Trending Topics
#10
DTR's Night Watchman & Poet Laureate
Looks good Mike..
How did you latch it? and did you have any clearance issues with opening the tail gate? Oops , never mind, just took another look at teh pic and saw...
How did you latch it? and did you have any clearance issues with opening the tail gate? Oops , never mind, just took another look at teh pic and saw...
Thread
Thread Starter
Forum
Replies
Last Post
Shorts
3rd Generation Ram - Non Drivetrain - All Years
15
10-10-2013 01:18 PM
4RnrRick
1st Gen. Ram - All Topics
4
02-27-2007 11:25 AM
I PASS GAS
2nd Gen. Dodge Ram - No Drivetrain
4
05-12-2006 11:19 PM
chrismez
3rd Generation Ram - Non Drivetrain - All Years
7
01-13-2004 06:37 AM