mopar2ya

Bucket seat options. I have grey buckets in my 93, the drivers side is totally shot. I had to weld the seat back adjuster years ago because it broke. Cant really find a good OEM drivers seat. What direct bolt in seats have folks used? If anyone has a good OEM seat, id be interested..

cabtruck

mopar2ya

Do they bolt directly on the 93 seat base or do I have to modify the base?

cabtruck

NJTman

Oliver might have one.

Carlisle is coming up in summer. Ramchargers have the same seats.

I took the passenger seat apart, and used all the guts for the driver seat. All you need is a good passenger seat, and you can do the same.

Passenger seats in these trucks didn't get much use at all.

oliver foster

Oh, there is no question I have a couple of sets of bucket seats here. I am just not interested in selling a good drivers seat only out of a pair of good bucket seats. If I don't sell them as a set, I would rather use them in [one of] my own builds than break up a set.
That and shipping to Kansas is the problem here.

mopar2ya

What I could use is a good seat frame. I can take to a upholstery shop to have it redone. My frame had to be welded in place as the mechanisim was trashed.

Taylorm2121

Bracket is broken at mounting screw, seat wobbles. Also, the hydro cylinder won't stay connected.
Anyone know where I can find a replacement mounting bracket for a 93 W250 passenger bucket seat? Also, the hydro cylinder will not stay connected.

u2slow

I deleted the hinge, cylinder and latch (thrashed) when I swapped them from my RC to the pickup. Anyone that can fit in the back of the clubcab has to be skinny and athletic enough to crawl over the console anyway

I would still run the buckets for comfort even if it recline feature was gone entirely.