According to another site, cumminsresponded to a letter that the blind hole cover was used in early 98? My question is, does anyone no for sure if all 98's have the blind hole cover? Or is there a production number available that correspondes to when cummins starting using the new cover.<br><br>You guessed it, I have a 98.<br><br>

 

I have heard that trucks up to the 2000 model year have KDP issues. AFAIK, all 12 valve engines have the open hole. I have the complete setup from H&amp;E, anybody in the Philly area who hasn't dealt with the KDP, let me know. I might have a set screw with your name on it.

 

[quote author=wannadiesel link=board=16;threadid=15162;start=0#142353 date=1054004107]<br>I have heard that trucks up to the 2000 model year have KDP issues. AFAIK, all 12 valve engines have the open hole. I have the complete setup from H&amp;E, anybody in the Philly area who hasn't dealt with the KDP, let me know. I might have a set screw with your name on it.<br>[/quote]<br><br>I haven't done anything to my 95 Dodge. I've read some about the set screw method of retaining the KDP, but I haven't seen anything in print on how to do it. Can you help? Thanks.

 

Thats what I wanna know..... Whats the part number for the new case that will prevent the Dowel pin from coming out..... Thinkin about goin that way........

 

you guys must have alot of time on your hands, and $200.00 you want to part with. i understand that the pump mounting, if you have a P7100 wont work. the new case is designed for the vp44's. your in there, just put a tab on it and call it good. its not all that hard to do your self.<br>Marv.

 

Bob1948, You have a PM in your Message Center!!