Front and rear axle seal part numbers...
Thread Starter
Registered User
Joined: Mar 2005
Posts: 2,615
Likes: 0
From: Nevada
Front and rear axle seal part numbers...
Been searching for over an hour and I can't seem to find matching part numbers. So if anyone has changed the 1) Driver's side front inner axle seal (dana 60) and 2) passenger side rear axle seal (dana 70), what part numbers are they?
Also... Is it ok to re-use the 2-9/16" locknut on the rear axle? Says to replace them after each service, but not sure.
Also... Is it ok to re-use the 2-9/16" locknut on the rear axle? Says to replace them after each service, but not sure.
Pickin on the wrong admin...
Joined: Mar 2007
Posts: 3,568
Likes: 1
Can't help you on the P/N...I only have rear axle dana 80 P/N...But if you decide to replace the rear axle lock nut,go to someone that is a dealer for Dana parts...My lock nut for my 80 costed $10....Dodge dealer wanted $75 and the jobbers wanted $65 per nut...
Thats ok sir....I will keep my nuts...
Thats ok sir....I will keep my nuts...
Thread Starter
Registered User
Joined: Mar 2005
Posts: 2,615
Likes: 0
From: Nevada
LOL.. actually laughed out loud for this one.
Thread
Thread Starter
Forum
Replies
Last Post
bgilbert
1st Gen. Ram - All Topics
5
Dec 27, 2009 06:31 PM
Hummin Cummins
3rd Gen Engine and Drivetrain -> 2003-2007
5
Aug 31, 2009 06:18 AM
Rick 12v CTD
1st Gen. Ram - All Topics
10
Mar 21, 2009 10:36 PM
RTillery
3rd Gen Engine and Drivetrain -> 2003-2007
3
Feb 7, 2009 08:46 AM
