1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

Getrag bearings, races and seal part numbers.

Thread Tools
 
Search this Thread
 
Old Dec 27, 2009 | 04:23 PM
  #1  
bgilbert's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 3,253
Likes: 0
From: Terre Haute,IN
Getrag bearings, races and seal part numbers.

5th gear/output shaft bearing = Koyo Hi-cap 25572
5th gear/output shaft race = Koyo Hi-cap 25528
Input gear bearing = Koyo JM 205149
Input gear race = Koyo JM 205110
Counter shaft bearing(s) = Koyo Hi-cap 30305 JR
Counter shaft race(s) = Koyo Hi-cap 30305 J-N
Output shaft pocket/pilot bearing = Koyo Hi-cap 32008 J-R

Front bearing retainer seal = NOK UH0549E (Singapore) also TTO F1273
Rear bearing retainer seal (2WD) = 471424 (National USA)
Rear bearing retainer seal (4WD) = NOK UH0550E (Singapore) also TTO E2320
Reply
Old Dec 27, 2009 | 05:16 PM
  #2  
BC847's Avatar
1st Generation Admin
 
Joined: Jan 2005
Posts: 4,601
Likes: 118
From: Buies Creek, NC
Thanks Bill.
Reply
Old Dec 27, 2009 | 05:24 PM
  #3  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
I went to add it to the sticky and it was already there... spooky!
Reply
Old Dec 27, 2009 | 05:37 PM
  #4  
bgilbert's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 3,253
Likes: 0
From: Terre Haute,IN
Originally Posted by wannadiesel
I went to add it to the sticky and it was already there... spooky!
I think I've seen someone post either all or a majority of the bearing and race part numbers, but don't remember seeing the seal numbers.
Reply
Old Dec 27, 2009 | 05:57 PM
  #5  
BC847's Avatar
1st Generation Admin
 
Joined: Jan 2005
Posts: 4,601
Likes: 118
From: Buies Creek, NC
Originally Posted by wannadiesel
I went to add it to the sticky and it was already there... spooky!
BUSTED!

I added a link to Bill's post to the bottom of the Drivetrain section.
Reply
Old Dec 27, 2009 | 06:31 PM
  #6  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
I figured it was you, thanks. I'm glad you put it at the bottom so it didn't wind up in there twice.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wcbcruzer
12 Valve Engine and Drivetrain
3
May 30, 2011 12:20 AM
jcb
1st Gen. Ram - All Topics
1
Aug 29, 2009 11:05 AM
pwrtripls1
1st Gen. Ram - All Topics
4
Jan 7, 2008 08:55 PM
Dieselboy1155
1st Gen. Ram - All Topics
1
Aug 27, 2007 08:57 PM




All times are GMT -5. The time now is 06:07 AM.