Ford conversion questions and concerns-
#1
Ford conversion questions and concerns-
I have been reading on several different sites..and the time has come to ask a few questions. I have a bought an 01 F350 with a 7.3 with a dead cylinder. I would like to put in a Cummins, as I have had lots of luck with them in small Freightliners, I want to keep the automatic.I also have really only found 12V to be affordable. What kind of mileage are you 4wd automatic trucks getting with mild to wild mods? What is your gearing and tire size? What is the most reliable way to get 350 - 400 rwhp with an 12v automatic? I would love to have a 24v but they seem cost prohibitive. I have had several 7.3's and they only get 15 to 17 mpg, my 6.0 only gets 16 to 18, but my neighbors twin turbo 24v dually gets 24 to 26 if he babies it, but it is a manual. I'd love to get the reliability of the cummins and the power, but I want decent mileage.
Who makes the adaptors for the Ford Tranmission (4r100) to cummins?
Who makes the adaptors for the Ford Tranmission (4r100) to cummins?
#2
Registered User
Join Date: Mar 2004
Location: Austin, TX, Toronto, ON
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
first visit:
http://www.fordcummins.com/
are u sayign u wanna keep the ford auto tranny? or are u gonna get any tranny?
http://www.fordcummins.com/
are u sayign u wanna keep the ford auto tranny? or are u gonna get any tranny?
#3
I want to keep the ford trans... and I have looked over at the Ford Cummins site...Just thought I'd seen someone on this site telling where to buy the adaptor for the trans cheaper.
#4
Registered User
Join Date: Aug 2004
Location: Houston, TX
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by robsredford
What kind of mileage are you 4wd automatic trucks getting with mild to wild mods? What is your gearing and tire size? What is the most reliable way to get 350 - 400 rwhp with an 12v automatic?
#5
Registered User
Join Date: Mar 2004
Location: Fair Oaks CA
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Rob, you should contact Superduty on this list , he is very knowledgable about swapping the Cummins into a Ford. he just finished putting a common rail with the ford trans in his.
#7
Registered User
Join Date: Oct 2005
Location: Pennslyvania , Lower Bucks County
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Re : conversion
Hi Guys
I was also considering doing the coversion ... I have the technical back ground to do the coversion ... I love the cummins , I was so demorelized by my ford ... I was going to do the coversion .
I did some #'s , for me to put a 12valve ...if I could find one with low miles ... I would never pull the one out of my new to me dodge ...I love this truck .
If I was going to put a reconditioned 12 valve with all the new parts it was cheeper for me to buy an new 300 hp + for 8 grand and just do the job right the first time than it would be for me to piece together a lot of used parts .
Plus my ford just sucked all the life out of me with all the problems the truck had ...its a great looking truck ...it's in the Misc trucks on this its ...
Once it gose I'm getting a new mega dually.
Later
Greg
I was also considering doing the coversion ... I have the technical back ground to do the coversion ... I love the cummins , I was so demorelized by my ford ... I was going to do the coversion .
I did some #'s , for me to put a 12valve ...if I could find one with low miles ... I would never pull the one out of my new to me dodge ...I love this truck .
If I was going to put a reconditioned 12 valve with all the new parts it was cheeper for me to buy an new 300 hp + for 8 grand and just do the job right the first time than it would be for me to piece together a lot of used parts .
Plus my ford just sucked all the life out of me with all the problems the truck had ...its a great looking truck ...it's in the Misc trucks on this its ...
Once it gose I'm getting a new mega dually.
Later
Greg
Trending Topics
#8
thanks for the input , the mileage is a big factor for me, as for the dead cylinder, this truck has 228 k hard miles, dirtiest truck I have ever seen, # 8 was not passing test with NGS tester, cylinder contribution test, replaced injector, stilll getting compression in crankcase, so rings, cylinder wall or head , I assume, the truck still runs, matter of fact I sold my other truck so this one is driven every day, at idle it will burn you eyes a bit...lol, I put alot of miles on my trucks, my personal highest was 508k on 99 superduty, I have a 7.3 to put in this truck and also a 6.0 , both from wrecked trucks, however in the back of my mind, I've always wanted a simple stout 12v in a Ford, sorry I never liked the dodge body, I figure it will go 600k, and for the naysayers, there was a 2003 Ford 6.0 dually at the sale the other day with 233k, guy deliverd boats with it, so the will make it!
Thread
Thread Starter
Forum
Replies
Last Post
getpower
1st Gen. Ram - All Topics
4
08-13-2014 12:52 PM
millsy
4th Gen Engine and Drivetrain-2010 and Up
12
02-02-2013 01:59 PM
holzbacher_22
3rd Gen High Performance and Accessories (5.9L Only)
2
06-19-2008 03:51 PM
Igor
3rd Gen High Performance and Accessories (5.9L Only)
8
05-10-2006 09:19 AM