Causes for cylinder scuffing?
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: Whitehorse,Yukon Territory,Canada
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Causes for cylinder scuffing?
Can anyone tell me what are the common causes to scuff a cylinder?Piston tops look perfect but the walls have light scuff marks on them.
#3
Registered User
Thread Starter
Join Date: Dec 2004
Location: Whitehorse,Yukon Territory,Canada
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
It had a slight miss and failed a cylinder efficiency test.Dealer thought it was a injector changed it ,still failed ,then checked the compression,#5 cylinder was low(310psi) so they pulled the head and it has a scuff in it.#6 & #1 were barley noticeable but 2,3,4 had light scuffing but nothing you could feel with a finger nail.
#4
A number of things will "scuff" the cylinder.
dirt in the air. Not really a scuff though.
an overheated piston
fuel in the oil + high temps
wrong piston/cylinder sizing
debris in the intake air, like filings.
What kind of scuff are you talking about ? Pictures ?
Are you stock or modded ? I see your posts about shimming fuel regulators, twins, etc. Is that on your truck ?
dirt in the air. Not really a scuff though.
an overheated piston
fuel in the oil + high temps
wrong piston/cylinder sizing
debris in the intake air, like filings.
What kind of scuff are you talking about ? Pictures ?
Are you stock or modded ? I see your posts about shimming fuel regulators, twins, etc. Is that on your truck ?
#5
Registered User
Thread Starter
Join Date: Dec 2004
Location: Whitehorse,Yukon Territory,Canada
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
The #5 cylinder scuff is opposite the exhaust port and runs about 1 inch wide.The other cylinders have scuff marks in various spots.I had a lot on my mind today when I was looking at them so I can't remember exactly where but it looked like it was enough to take off the cross hatch in certain areas.I will try to get some pics but I am not sure on how to post them.
Trending Topics
#8
Registered User
I've seen scuffing/bore damage from piston rings installed incorrectly. I don't know how that can happen from the factory but nobody is perfect.
Especially that you mention the problem opposite of the exhaust valve as that's where you normally have an endgap of a ring and they do tend to rotate somewhat in the bore which would give you a wider path of damage. JMO....
Especially that you mention the problem opposite of the exhaust valve as that's where you normally have an endgap of a ring and they do tend to rotate somewhat in the bore which would give you a wider path of damage. JMO....
Last edited by trik396; 10-19-2005 at 08:18 AM. Reason: addition
#10
Registered User
Originally Posted by J.DAVY
Can you explain "wet stacking"?
MikeyB
#11
Registered User
How many miles do you have on your 05' ???
Seems like you've already "put her through her paces" for a "newer" truck.
Sure hope you let her break in properly...
Seems like you've already "put her through her paces" for a "newer" truck.
Sure hope you let her break in properly...
#12
Registered User
A mild case of coolant mixing with oil can also cause the scuffing you describe. I have seen this on Volvo highway truck and off road diesels, as well as Mack units. Just a bit of food for thought.
#14
Originally Posted by J.DAVY
Can anyone tell me what are the common causes to scuff a cylinder?Piston tops look perfect but the walls have light scuff marks on them.
"2005 3/4 4x4 Q.C. S.W.B.,Auto,T.S.T.Quadzilla downloader,BD Flex Plate,D.T.T. race tranny 89%Converter,pro-52 turbo,F.A.S.S. "
I was reading in another thread about EGT's and thought of the box you have. What kind of EGT's did your truck run with the mods?
#15
Registered User
Join Date: Jan 2004
Location: Maritimes, Canada
Posts: 2,696
Likes: 0
Received 0 Likes
on
0 Posts
Guys, Given the location of the scuffing, I'm thinking excessive unburned fuel in the exhaust combined with excessive EGT's. J.Davy what were your maximum EGT's? Did you ever have any high egts and black smoke. ks
Thread
Thread Starter
Forum
Replies
Last Post
packard8
3rd Gen High Performance and Accessories (5.9L Only)
1
09-09-2009 04:24 AM
Gear Poet
HELP!
3
06-19-2009 10:11 AM
Gear Poet
24 Valve Engine and Drivetrain
1
06-18-2009 05:44 AM
dieselnewbie
3rd Generation Ram - Non Drivetrain - All Years
8
01-18-2005 10:48 PM
Journier
General Diesel Discussion
11
11-22-2004 02:56 PM