Battery cable ends
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Piedmont, Oklahoma
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Battery cable ends
I need to replace my battery cable ends, but none of the auto shops seem to have heavy duty enough ones, ones that are big enough to hold all the wires that go to the ground side of these truck's batteries. Where do you all find yours? My local NAPA has some that have a stud on top that I could put terminals on the small black wires then bolt to the top, but I'm not sure I trust these. What do you all use?
#3
If they are just fitting loose autozone and advance auto also have little caps that slid onto the batteries. They just make the posts bigger and allow the cables to tighten down. I had to use these and have never had any problems.
#4
Registered User
Thread Starter
Join Date: Oct 2005
Location: Piedmont, Oklahoma
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
The problem isn't fitting on the post, it's securing all 3 black wires into the cable end. There is the big black cable, then 2 little wires that go into the cable end also. The problem is keeping all 3 of them secured so they don't work loose and lose contact.
#6
#7
Registered User
Join Date: Jun 2008
Location: Roseburg Oregon
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
why can napa order them I did on mine. next day had the new heads the where not the crimp style they where the 2 bolt clamping style work great. and like 4-5 bucks
Trending Topics
#8
Registered User
Thread Starter
Join Date: Oct 2005
Location: Piedmont, Oklahoma
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
You sir are a genius. No, I hadn't thought of that, but the way today is going, I need someone to point out the obvious. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post