DTR #8 November and December 2009 Thread
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
Originally Posted by BJ Supervisor
You also can't change BJ's unless it is approximately -12F and you must sleep in a trailer with no heat the night before
Registered User
Joined: Aug 2009
Posts: 44
Likes: 0
No ball joints for the rear end. Are you sure they're wearing the edge on the rear, or was it wear from before those tires were rotated to the rear?
You're right. I'll have to keep an eye on the weather and get ready to stay in the garage. But I'm taking a sleeping bag this time, I'm getting too old to sleep in the cold with only a thin sheet.
You're right. I'll have to keep an eye on the weather and get ready to stay in the garage. But I'm taking a sleeping bag this time, I'm getting too old to sleep in the cold with only a thin sheet.
I bought the truck used about 4 months ago, the tires on it had balding spots all over, I changed them out to and the BFG were used but were ok before I put them on, all 4 are wearing on the the edges.
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Had gotten use to 4x4 disengaging after 3-5 seconds. With vacuum line spliced.... disengages almost instantly! Thanks!
RJ
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
Thread
Thread Starter
Forum
Replies
Last Post
Red3quarter
Other
341
Jan 5, 2010 09:38 PM
Red3quarter
Other
249
Nov 21, 2009 10:54 PM
Red3quarter
Other
408
Aug 8, 2009 10:17 PM