April Meet at The Ranch
Registered User
Joined: Oct 2006
Posts: 528
Likes: 0
Well Jana and I have been doing some work on the patio. We have a new "Texas" themed fire pit im itching to show off and try out.
So anybody that wants to come to our house on May 1st for a Get Together, we would love to have you. Justin, Bring the wife! You won't be ignoring her if you bring her to a party..
The wives can sit around, enjoy the day while we talk or look at trucks or do some light wrenching.
I will mow the back field behind my house like before.....on Aug. 8th, for parking the trucks. This meet will be much better because it won't be 105 degrees.
We can start from say noon on and run into the late evening is fine with us.
So who all is coming? Saturday, May 1st, My house in McKinney, Noon till midnight or anywhere in between.
1. Robert and Jana (maybe the kiddos Jared and Haley)
2. ??
3. ??
..
So anybody that wants to come to our house on May 1st for a Get Together, we would love to have you. Justin, Bring the wife! You won't be ignoring her if you bring her to a party..
The wives can sit around, enjoy the day while we talk or look at trucks or do some light wrenching.I will mow the back field behind my house like before.....on Aug. 8th, for parking the trucks. This meet will be much better because it won't be 105 degrees.
We can start from say noon on and run into the late evening is fine with us.
So who all is coming? Saturday, May 1st, My house in McKinney, Noon till midnight or anywhere in between.
1. Robert and Jana (maybe the kiddos Jared and Haley)
2. ??
3. ??
..
Is this still the plan?
Registered User
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Well you may get ur wish. Since hardly anybody wants to come on the 1st, maybe we should postpone it a few weeks....later into May.
comments? suggestions?
..
Registered User
Joined: Jul 2002
Posts: 2,242
Likes: 16
From: Celina, TX
Don't plan around my schedule for May, otherwise the meet will be in June. The first open weekend on my calendar is 6/19...and that's probably only open because it's almost two months away.
Thread Starter
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
Registered User
Joined: Nov 2004
Posts: 5,680
Likes: 2
From: McKinney, TX
Well due to lack of interest and/or schedule conflicts........we will go ahead and cancel for May 1st. It's almost like everybody is kinda "DTR'd" out after 5+ years of meets, drags, dynos, and pulls etc. and want to take a year off.. Or maybe just the economy?
Im planning to have a neighborhood party (non-DTR but u r welcome to come if u want) on May 8th most likely.
If yall want to try again for a DTR meet at my house on the 15th, 22nd, or 29th...I can prob work something out. Speak up. Im kinda surprized Micah and the ODRA don't have something coming up pretty soon.
..
Or maybe just the economy?Im planning to have a neighborhood party (non-DTR but u r welcome to come if u want) on May 8th most likely.
If yall want to try again for a DTR meet at my house on the 15th, 22nd, or 29th...I can prob work something out. Speak up. Im kinda surprized Micah and the ODRA don't have something coming up pretty soon.
..
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Just found a reasonably priced Dodge part! Relatively anyway.
Have tried to fix my vacumme lines to the frt axle (for 4x4 operation), but any decent bounce just dislodges the soft lines, where they join the hard lines ....going to the transfer case.
The whole piece..... hard lined, soft lines and connectors (from T-case to frt axle) comes as one part #. Price - $42.00 from dealer.
I was so impressed I asked about a new dash 'bezel'. Would you believe $350.00??????? BUT, they have a glue on cover....identical materal.... for $150.00
Looks very nice. Bgt one.. will report after install.
Mine is really cracked and missing chunks and pieces. I have not had the dash cracking problems that many of you have, but my bezel is in bad shape. Remover a few too many times, I guess?
Rowland
Have tried to fix my vacumme lines to the frt axle (for 4x4 operation), but any decent bounce just dislodges the soft lines, where they join the hard lines ....going to the transfer case.
The whole piece..... hard lined, soft lines and connectors (from T-case to frt axle) comes as one part #. Price - $42.00 from dealer.
I was so impressed I asked about a new dash 'bezel'. Would you believe $350.00??????? BUT, they have a glue on cover....identical materal.... for $150.00
Looks very nice. Bgt one.. will report after install.Mine is really cracked and missing chunks and pieces. I have not had the dash cracking problems that many of you have, but my bezel is in bad shape. Remover a few too many times, I guess?
Rowland
I watch wind blow...
Joined: Dec 2006
Posts: 1,390
Likes: 0
From: Red Dirt territory of TEXAS
I could go for a new dash....
Well I had a weekend for the books, a class mate called me on Thursday about midnight and said " pack your stuff we are leaving for Vegas tomorrow after class". so we did, 11 hour drive or so . We tried to get in as many of the sights as we could in Vegas with the time allotted. We left Vegas around 1pm checked out 'Boulder Dam' for about an hour and then drove on.
We were about 4 miles from the Grand Canyon exit when we decided that would be a good side trip. The Grand Canyon is so amazing. Before this little endeavor I had never been West of Albuquerque in the Southwest. So I tackled 3 amazing places in about 8 hours, Vegas, Dam, Canyon. What a great trip. Heck I even left Vegas with about $2.40 more than I got there with .
We arrived back in Tuc. at 0530 this morning, it was a rough morning in class today nap time.
We drove a chevy SS truck and not mine so I still can't report on mpg loss/ gains of the Fluxes.
Just thought I would share me weekend.
Well I had a weekend for the books, a class mate called me on Thursday about midnight and said " pack your stuff we are leaving for Vegas tomorrow after class". so we did, 11 hour drive or so . We tried to get in as many of the sights as we could in Vegas with the time allotted. We left Vegas around 1pm checked out 'Boulder Dam' for about an hour and then drove on.
We were about 4 miles from the Grand Canyon exit when we decided that would be a good side trip. The Grand Canyon is so amazing. Before this little endeavor I had never been West of Albuquerque in the Southwest. So I tackled 3 amazing places in about 8 hours, Vegas, Dam, Canyon. What a great trip. Heck I even left Vegas with about $2.40 more than I got there with
. We arrived back in Tuc. at 0530 this morning, it was a rough morning in class today
nap time.We drove a chevy SS truck and not mine so I still can't report on mpg loss/ gains of the Fluxes.
Just thought I would share me weekend.
Thread Starter
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
Seen them all! Great sites to see.
I could go for a new dash....
Well I had a weekend for the books, a class mate called me on Thursday about midnight and said " pack your stuff we are leaving for Vegas tomorrow after class". so we did, 11 hour drive or so . We tried to get in as many of the sights as we could in Vegas with the time allotted. We left Vegas around 1pm checked out 'Boulder Dam' for about an hour and then drove on.
We were about 4 miles from the Grand Canyon exit when we decided that would be a good side trip. The Grand Canyon is so amazing. Before this little endeavor I had never been West of Albuquerque in the Southwest. So I tackled 3 amazing places in about 8 hours, Vegas, Dam, Canyon. What a great trip. Heck I even left Vegas with about $2.40 more than I got there with .
We arrived back in Tuc. at 0530 this morning, it was a rough morning in class today nap time.
We drove a chevy SS truck and not mine so I still can't report on mpg loss/ gains of the Fluxes.
Just thought I would share me weekend.
Well I had a weekend for the books, a class mate called me on Thursday about midnight and said " pack your stuff we are leaving for Vegas tomorrow after class". so we did, 11 hour drive or so . We tried to get in as many of the sights as we could in Vegas with the time allotted. We left Vegas around 1pm checked out 'Boulder Dam' for about an hour and then drove on.
We were about 4 miles from the Grand Canyon exit when we decided that would be a good side trip. The Grand Canyon is so amazing. Before this little endeavor I had never been West of Albuquerque in the Southwest. So I tackled 3 amazing places in about 8 hours, Vegas, Dam, Canyon. What a great trip. Heck I even left Vegas with about $2.40 more than I got there with
. We arrived back in Tuc. at 0530 this morning, it was a rough morning in class today
nap time.We drove a chevy SS truck and not mine so I still can't report on mpg loss/ gains of the Fluxes.
Just thought I would share me weekend.
Thread Starter
Chapter President
Joined: Oct 2002
Posts: 4,983
Likes: 1
From: Sedalia, Texas
My bezel has been off less than ten times and it has one crack at the top left.
Just found a reasonably priced Dodge part! Relatively anyway.
Have tried to fix my vacumme lines to the frt axle (for 4x4 operation), but any decent bounce just dislodges the soft lines, where they join the hard lines ....going to the transfer case.
The whole piece..... hard lined, soft lines and connectors (from T-case to frt axle) comes as one part #. Price - $42.00 from dealer.
I was so impressed I asked about a new dash 'bezel'. Would you believe $350.00??????? BUT, they have a glue on cover....identical materal.... for $150.00 Looks very nice. Bgt one.. will report after install.
Mine is really cracked and missing chunks and pieces. I have not had the dash cracking problems that many of you have, but my bezel is in bad shape. Remover a few too many times, I guess?
Rowland
Have tried to fix my vacumme lines to the frt axle (for 4x4 operation), but any decent bounce just dislodges the soft lines, where they join the hard lines ....going to the transfer case.
The whole piece..... hard lined, soft lines and connectors (from T-case to frt axle) comes as one part #. Price - $42.00 from dealer.
I was so impressed I asked about a new dash 'bezel'. Would you believe $350.00??????? BUT, they have a glue on cover....identical materal.... for $150.00
Looks very nice. Bgt one.. will report after install.Mine is really cracked and missing chunks and pieces. I have not had the dash cracking problems that many of you have, but my bezel is in bad shape. Remover a few too many times, I guess?
Rowland
