So today i decided to pull my afc and push the stock plate to FF. SO i finally get the break off screw off. Did you catch that. It had a break off screw and none of the paint on the fuel lines was scratched. anyway i finally pull it off and loosen the screws that hold the plate. I was going to just push it forward and leave it but decided to take a look first. GLAD I DID!!! What kinda plate is this i have seen lots of stock plates and to the best of my knowledge this is not a stocker. unless all the plates iv seen are for a 215. anyway im going to try and post a pic let me know what you guys think it is.

Chris

 

Looks like a #8 maby a #6. A lot of kits come with new brake off screws.

 

Can this plate be slid FF without adjusting the pump?

Chris

 

No numbers on it?? Might be aomeone's "custom" grind??

 

Nope its not a TST plate the more i look at it im thinkning it is someones custom grind. Ill get some more pics of it for you guys. Looks like im going to be upgrading my trans quicker than i thought.

Chris

 

You may if you slide it up. Or if you leve it were it is.

 

lol yeah i was hoping to get by with only sliding the stocker forward. but now seeing this. Who knows how long its been there. 2nd owner thought it was stock. I left it near stock position and slid the AFC forward.

Chris

 

You should be fine.

 

It looks like a 100 except for the bottom of the ramp and a tiny bit of de-fuelling at the top. Definately a custom grind.