which transmission line to install temp. sending unit?
#1
Registered User
Thread Starter
Join Date: Dec 2004
Location: MASS.
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
which transmission line to install temp. sending unit?
I am trying to figure out which tranny line do I mount the block for the temp sending unit. I am picking it up today on the way home. I have read that the best place to put it is in the outgoing line (suppose to be the hottest). I noticed there is 2 line (of course) on the left side one towards the front and one towards the rear. Is it marked which one is the outlet or does any body know ? "HELP" Also does anybody else have thiers mounted there and how are your readings. Any help would be appreciated. Thank you in advance......
#2
Registered User
Join Date: Jun 2005
Location: east central IL
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
From what I've been looking at, and totally guessing,
the fluid circuit would appear to be
tranny > cooler-on-engine > cooler-in-front > tranny
^
I'd think the sensor
should go here. (?)
When you're underneath looking at it you should be able
to pretty much trace which line goes where.
Hmm, just realized it's entirely possible the circuit runs
completely in reverse to my guess. Better wait until
somebody that actually knows what they're talking about.
Lowell
the fluid circuit would appear to be
tranny > cooler-on-engine > cooler-in-front > tranny
^
I'd think the sensor
should go here. (?)
When you're underneath looking at it you should be able
to pretty much trace which line goes where.
Hmm, just realized it's entirely possible the circuit runs
completely in reverse to my guess. Better wait until
somebody that actually knows what they're talking about.
Lowell
#4
Registered User
Join Date: May 2005
Location: rain belt
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
I think he's asking which is the outlet line, and inlet.
Here's how you find out, when you get home today and shut it off grab one line with each hand and squeeze. Whichever is hottest is the line to the sensor on.
Here's how you find out, when you get home today and shut it off grab one line with each hand and squeeze. Whichever is hottest is the line to the sensor on.
Thread
Thread Starter
Forum
Replies
Last Post
CRIVERHD12
3rd Gen High Performance and Accessories (5.9L Only)
4
06-15-2005 09:37 PM
wexman
3rd Gen High Performance and Accessories (5.9L Only)
9
04-16-2004 01:26 AM
javamann
Performance and Accessories 2nd gen only
3
08-10-2003 03:11 PM