stacks again
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Williston, ND
Posts: 1,003
Likes: 0
Received 0 Likes
on
0 Posts
stacks again
i know not another stack ? but ok what parts do i need for stacks and where do i get them?` i know i want to use the 6x3 square tubing and 5" miter cut stacks but what do i need other then that. also if the stacks are welded to the tubing do i need to clamp them to the bed to stablize them thanks
ps. anyone got any pics of under the truck from the turbo to the bed then in the bed those would be very helpful thanks
ps. anyone got any pics of under the truck from the turbo to the bed then in the bed those would be very helpful thanks
#2
Registered User
Can't help with pics or what parts you need....but these guys have it all...
http://www.grpipes.com/
Talk to their dealer in Wiscosin. He has lots of knowledge...and lots of parts!
RJ
http://www.grpipes.com/
Talk to their dealer in Wiscosin. He has lots of knowledge...and lots of parts!
RJ
#4
I've got the crossbox style (3X5) with 5" mitres, and am going to all 90's and bent tops to make the flow a little smoother and keep the water out. I might be in to selling if you're interested. Could check freight cost to see if it's feesable...let me know.
Thread
Thread Starter
Forum
Replies
Last Post
Steven K
3rd Gen Engine and Drivetrain -> 2007 and up
4
06-04-2009 10:32 AM
nfsommer
3rd Gen High Performance and Accessories (5.9L Only)
21
04-04-2007 03:45 PM
rockittboy
3rd Generation Ram - Non Drivetrain - All Years
9
02-03-2006 12:38 AM