is something wrong?
#1
Registered User
Thread Starter
Join Date: Mar 2005
Location: Washington
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
is something wrong?
I have never drivin or ridden in any other modded ctd other than mine. I have never dynoed or raced, I know my truck seems to run well and gets moving pretty fast. I have 3.55 gears. Tires are 285-75-16. It just seems like with the mods done to my truck and the fact that I have a one tire fire i would have a pretty bad traction problem. Which I don't, at least in the dry. Don't get me wrong I'm not complaining I would rather not have to baby the throttle everywhere but I'm kinda wondering if something may be wrong? Weak vp44 or something. No hard starting, plenty of smoke, no codes. Boost about 34 psi. Any input appreciated. Thanks
Luke
Luke
#2
I would venture the combiniation of the HX-40 and the lack of a timing box are whats demolishing your bottom end torque.
As for getting that bottom end monster, its easy.... MAD ECM !!!!
If you dont want the full throttle snapping fury of the MAD ECM, get an EZ. I hated the bottom end of my truck until I stacked the EZ with my TST...But I really want the MAD !!!
KP
As for getting that bottom end monster, its easy.... MAD ECM !!!!
If you dont want the full throttle snapping fury of the MAD ECM, get an EZ. I hated the bottom end of my truck until I stacked the EZ with my TST...But I really want the MAD !!!
KP
#6
Registered User
Thread Starter
Join Date: Mar 2005
Location: Washington
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
wow I was hoping for 475. You guys are right. I just need to take it and dyno it. I just don't have too much time. Closest dyno shop is Dynomite diesel and its an hour with no traffic. Sounds like an excuse to take a day off of work! Thanks
Trending Topics
#8
Registered User
Thread Starter
Join Date: Mar 2005
Location: Washington
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I'll have to see one of these days. I've had the truck since january and done all the mods myself but no dyno runs yet. BTW BigBlue, the 3rd gen badges look good. I've been thinking of doing that for awhile.
Thread
Thread Starter
Forum
Replies
Last Post
deezulsmoke
3rd Generation Ram - Non Drivetrain - All Years
26
01-28-2005 11:13 PM