Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Question For An Injector Guru....

Old Feb 29, 2004 | 03:41 AM
  #1  
SilverDodge's Avatar
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 103
Likes: 0
From: Spokane, WA
Question For An Injector Guru....

So, as my sig. says, i have twins and super mentals. I would like to increase my spool up and pull, so looking to change showerheads. I am a 01 ETH 6speed, 20 over head gasket (head was shaved 6 though) and a HX35/12 - HT3B/23 twin setup. I dont tow at all, my main goal is ultimate street performance. What is the largest EDM injector that i can safley go with?

Thanks!
~Darin
Reply
Old Feb 29, 2004 | 09:05 AM
  #2  
Stamey's Avatar
Registered User
 
Joined: Jan 2002
Posts: 2,730
Likes: 7
From: Powhatan, Virginia
I'd say you should contact Don M directly have have him make you up a custom set. I hear he will work with you to give you what you want, probably Mach 6's. When I get injectors that's where mine will come from.

Chris
Reply
Old Mar 1, 2004 | 11:38 AM
  #3  
HOHN's Avatar
Registered User
 
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
With those tight housings, there's NO WAY you could run a Mach 6-- not enough air. Even a Mach 5 would be a little warm.

I think Don would recommend a Mach 4 or 4.5ish. The 4's would be pretty safe EGT wise.

Consider also that the Mach injectors are a lot hairer in each stage than most honed injectors. A Mach 3 is about SuperMental level (only a lot less smoke).

A mach 4 would put you right near where a Mega Mental runs, only a LOT cleaner.

Not to mention is will spool those twins in a blink

Justin
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
doorguy
3rd Gen Engine and Drivetrain -> 2003-2007
33
May 18, 2011 12:39 PM
justagoodolboy
1st Gen. Ram - All Topics
38
Jan 16, 2009 07:32 PM
cwoodall
3rd Gen Engine and Drivetrain -> 2003-2007
2
Sep 25, 2007 05:39 PM
Haulin_in_Dixie
2nd Gen. Dodge Ram - No Drivetrain
15
Sep 6, 2005 06:08 AM
oscaroc
Performance and Accessories 2nd gen only
7
Apr 2, 2005 12:14 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:40 PM.