Quad Adrenaline Beta Testing....
#152
Registered User
Join Date: May 2007
Location: Newberg, Oregon
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I finally put the V300 tune in. I have not tapped the wire yet so I am only in the two lower settings. Even in PL02, is this tune milder? I don't see much difference between PL00 and PL02. When I had the tune in it that came with the box, PL02 seemed snappier. I am not expecting a rocket though with my gearing and tire size. The timer works for the 20 seconds every time, but neither the brake or accelerator turn it off.
#153
Registered User
Join Date: Jan 2005
Location: ALBUQUERQUE
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
well i will by dynoing my drag comp and then my quadzilla this weekend, i believe quad is working on it but the comp file doesnt work on my truck for some reason, so what file should or what files are you guys dynoing on?
#154
Registered User
Beta V300. As stated somewhere around here...I picked up 25 HP over previous stack (Smarty/TST Comp).
Mike, I had one run at track. Results are not conclusive for three reasons...
-Still had Smarty on #2, for tire correction.
-Adrenaline on #10... not fastest setting
-Because of Smarty, still have boost building problems since going to Mach 6's.
But results were encouraging (13.1/101).... as good as last several runs on TST Comp Stack.... and this Quad box is still a long way from max setup.
Have since removed Smarty and boost building problem is eliminated totally.
RJ
Originally Posted by MikeD
Dynos are nice, but give me 1/4 times any day.
-Still had Smarty on #2, for tire correction.
-Adrenaline on #10... not fastest setting
-Because of Smarty, still have boost building problems since going to Mach 6's.
But results were encouraging (13.1/101).... as good as last several runs on TST Comp Stack.... and this Quad box is still a long way from max setup.
Have since removed Smarty and boost building problem is eliminated totally.
RJ
#155
#157
Registered User
Join Date: Jan 2005
Location: ALBUQUERQUE
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
thanks.. i am currently running the old factory 6 setting because the beta v300 wont work on my truck and of all the files that seems to be the strongest. so you dynoed with a defueling file?
#160
Registered User
Join Date: Mar 2005
Location: Red Deer, Alberta
Posts: 3,190
Likes: 0
Received 0 Likes
on
0 Posts
I'm still having surging issues with Beta V300 at low rpm and around 1700rpm-1900rpm. I wonder if it has anything to do with it being -25 here. My truck hates the cold with these Mach 4's!!! Everything else is working 100%. Boy that high idle would be nice at these temps!!!
#165
Registered User
Join Date: Jan 2007
Location: Sulphur Springs, Tx
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
hey quad when do you think that we will have anymore tunes to play with? Im really wishing I had the high idle again and longer TT. Not trying to harras you or anythin just wondering.