Can someone post pictures on where they mounted their fass pump? There is nothing under there that has enough area to drill all three holes....Unless I drill the frame?

Please post pics of where you mounted your pump

 

Heres where i mounted mine, do you have the fass, or fass ll


Randy

 

I have the 1008 with the fuel separator.

Keep those pics coming. The only place I see is to drill the frame and I really would rather not do that.

 

I dont have any pictures but when i go back to rockwall later this week if you still havent got it figured out we could meet somewhere and i could show you mine.

 

Heres a pretty good picture. Do a search in the member galleries there's quite a few examples.

 

When I but my buddies on with him we welded two pieces of angle iron together so it was shappe like an "N" (but 90* angles obviously) and bolted one end to the frame where it already had a pair of holes that were a couple inches apart and then bolted the FASS to the other end.

Where we mounted it was close to the crossmember for the tranny in that area of the frame where it isn't boxed but more "C" shaped and just put it at the very back of that opening past the T-case.

If that doesn't make any sense then I apologize, I am really tired and kind of out-of-it. lol

 

Thats how I finally got mine after some drilling and a hammer.

Thanks for the help everyone

 

heres mine