New 100hp injectors; truck stalls shifting into gear
Originally Posted by Stamey
What about trying the 275's again, or a set of stock sticks? Did you ask the supplier about the pop-off pressure for those 100hp injectors? Could they send a set with lower pop-off pressures?
Chris
Chris
Pop off pressures were questioned. Don M had mentioned that so we asked this injector shop. They sent out another set of injectors and stated they had double checked this set. They also stated that they had never seen this problem before. The new set was installed and the truck continued to do the same thing. We feel like we have been very careful in the injector install area and this has just exposed another problem that was hiding before because of the increased delivery to the fuel system. We also do not think it is the injectors after having installed 2 sets with the same issue. They were very cool to send another set since we were having issues.
Can't put the 275's in at this point as they are in my truck right now. I did just buy a set of 1.5's that I couldn't pass on and may get them in this week, but I don't think he wants to change injectors again on his although this is an option.
Thread
Thread Starter
Forum
Replies
Last Post
turbos10
Performance and Accessories 2nd gen only
10
Mar 27, 2011 11:17 PM
Baxter
3rd Gen Engine and Drivetrain -> 2003-2007
5
Jul 11, 2010 10:43 AM
Hounddog
3rd Gen Engine and Drivetrain -> 2003-2007
3
Feb 14, 2006 06:33 PM



