need some info. ?????
need some info. ?????
this is my first post! but iv been around just reading up on all the great advise you guys give.ok here are my questions ??? <br> whats the most power i can get out of box(like an e-z) with a stock motor can i run any box? does the box just add fuel or does adj boost press. what about fuel press. would it be to low? would putting in a set of inj. void warry. im not looking for big hp gains but i do like to have fun with my truck(sled pulls at fairs draging friends at lights)...and info would begreat !!!! ;D ??? ??? ''01 extcab ctd ,4in exhaust and gauges on way saveing for tranny work thanks aghin! ???
Re:need some info. ?????
Here is my suggestion for what you are after.<br><br><br>Do the tranny first and foremost then do the motor mods.<br><br>Get yourself a fuel pressure gague and maybe a fuel system upgrade then you are ready for mods. A good streetable combo would be Stage 2 or 3 injectors, edge comp box, HX 40 or similar turbo, scotty 2 intake. You already have gagues and exhaust if I was to mod again that would be the right order.
Thread
Thread Starter
Forum
Replies
Last Post
Mini_Donkeys
Performance and Accessories 2nd gen only
4
Apr 19, 2007 12:21 PM
dieselman24
3rd Gen High Performance and Accessories (5.9L Only)
2
Jan 16, 2005 06:20 AM
00turbo
General Diesel Discussion
4
Oct 19, 2004 04:02 PM



