Whats the torque spec for the mag-hytec tranny pans, I cant seem to find my paperwork.
Thanks

 

14 Mag-Hytec


Installation Recommendations


DODGE #727-D TRANSMISSION PAN



Please read these instructions and parts list completely before installing this new transmission pan. Consult your owner's or shop manual for transmission fluid requirements.

TOOLS REQUIRED


1/2 socket wrench and driver (for removing the old cover)
1/4 allen bit with a 3/8 ratchet drive (1/4 allen key is furnished)
3/16 allen bit with a 3/8 ratchet drive
3/8 drive torque wrench
Gasket scraper
Smooth flat file by 8 to 12 in. long
Oil drain pan (minimum 12 Qt. capacity)
ATF+3 type 7176, 2001 up ATF+4 or ("LE" 7500
Monolec Power Fluid for severe service and HD applications).



PARTS CONTENT

Number Quantity Item

1.
1
Mag-Hytec Transmission Pan with a Mag-Hytec Buna 70 gasket

2.
14
5/16-18 zinc plated allen head cap screws (Torque 12-16 ft. Ibis)

3.
16
5/16 stainless AN washers

4.
1
Drain plug assembly with magnet and O-ring ARP 568-910 (installed)

5. 1 1/8 pipe plug SS (for optional temperature sender not included) Drain plug and 1/8 pipe plug (Torque to 30 in. Ibs)

 

http://www.mag-hytec.com/Instal_dodge_727d_trans.htm