lukes link the whole front end?
#1
lukes link the whole front end?
Looking at the costs of all this stuff, I guess Im gonna go with lukes links everywhere. I ve used one before on another guys truck and it seems pretty decent, you just have to be a bit forceful with it.
Between cross over steering, the 03 track bar update etc....the 250 on lukes links to reuse all my original stuff seems pretty good. I figure it lasted awhile and drove nice so why not keep it.
Anybody done every joint with lukes links? Is it ok?
Between cross over steering, the 03 track bar update etc....the 250 on lukes links to reuse all my original stuff seems pretty good. I figure it lasted awhile and drove nice so why not keep it.
Anybody done every joint with lukes links? Is it ok?
#3
Registered User
I used a Luke's Link on my 2000 for the track bar. I thought of using them on the tie rod ends but I'm not sure there will me enough clearance between the link and the wheel for it to work. The web site says it will work, but the measurements I've taken don't seem like there will be enough clearance.
#4
I redid my whole front end with LL, including Trac Bar, 70k later no problems here. Installed new dss bar, and new steering box, with new greeseable bj's upper and lower, and new greeseable ujoints. Sure drives like a train ever since i did that, and still does today. My last set of cooper at's went 52k, still had another 5k-7k left. Before the front end rebuild could only get 40k out of a set of cooper at's.
Thread
Thread Starter
Forum
Replies
Last Post
243
Performance and Accessories 2nd gen only
14
06-15-2004 02:23 PM