Hey guys my friends looking at getting a set of injectors for his 01 24v. The truck already has a set of 4inch duals and a intake along with a FASS fuel system. The injectors are from edge and are the stange 1 jammers. Is it worth the money to pay a little more and get the stage 2? Is there anything else engine related that should be done to the truck for these to work properly? Also are these injecters reliable and not going to ruin the engine?

 

Does he have a chip in it yet?

 

tell him to buy my stage 3's. 400 shipped

 

I'll bet he has a couple on the hood, since the truck is 6yrs old.

 

The trucks got 143k on er and no there is no chip on it yet, he was gonna get that after the injectors.

 

He's going to want to set up some guages and some sort of box before injectors.
A pyro guage as the bare minimum before injectors.

 

Tell him to buy a Juice w Attitude so he gets his gauges all in one kit. Then he will need to upgrade his drive train, and finally some big injectors and a Silver Bullet Turbo!

 

I agree here, a box would do boost fueling, and really let him feel the full effects of the injectors, a used EZ or VanAaken would do the trick for about $200. I would say yes, get the stage 2.

And Gauges before mods, always, FP on a 24v and Pyro at least.

 

Thanks alot guys i think were going to look for the juice with attidude so he can keep an eye on things, better safe than sorry, then order up the injectors.