Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

injector ?

Old Jan 26, 2011 | 07:05 AM
  #1  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
injector ?

hey guys im lookin at injectors and not really sure which one to get i have my stock turbo but i plan on eventually getting rid of it or making it into a set of twins, but anyways im lookin at injectors i want as much power as i can get without having to change my turbo right away i can keep my foot out of it for the most part if i need to while i wait to get a turbo.. any suggestions ?


chris
Reply
Old Jan 26, 2011 | 07:45 AM
  #2  
G1625S's Avatar
Registered User
 
Joined: Mar 2004
Posts: 4,767
Likes: 5
From: port crane, NY
Without a built tranny, I wouldn't throw sticks at it just yet. All you're gonna do is blow through the converter with the extra power, and the stock turbo doesn't like much more fuel than the stock sticks throw. JMO.
Reply
Old Jan 26, 2011 | 07:59 AM
  #3  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
tran is getting built within the next like 2 months so thats not really a issue to me
Reply
Old Jan 26, 2011 | 12:10 PM
  #4  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
i just dont know what ones to run i was thinking the marine 370's but wasnt sure if those are good or not i have read that some really like them others dont so im not really sure what to think. any help would be good i want to upgrade the turbo but those seem to be a little bit more expensive than injectors,
Reply
Old Jan 26, 2011 | 07:27 PM
  #5  
d-rod's Avatar
Registered User
 
Joined: Jun 2010
Posts: 96
Likes: 0
From: central il.
i like my 75 hp ddp's i only have a haze at wot, pulling i can get 1200 so i know i need more air but had them couple years now and for price i think they good for me, and the put smack down on trans. that will be a later project. Kid in town here had 370's and ran the **** out of it and burnt it up, it ran hot but no gauges so melt city for him!!
Reply
Old Jan 26, 2011 | 08:47 PM
  #6  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
Originally Posted by d-rod
i like my 75 hp ddp's i only have a haze at wot, pulling i can get 1200 so i know i need more air but had them couple years now and for price i think they good for me, and the put smack down on trans. that will be a later project. Kid in town here had 370's and ran the **** out of it and burnt it up, it ran hot but no gauges so melt city for him!!
so your running the stock turbo?
Reply
Old Jan 26, 2011 | 09:06 PM
  #7  
d-rod's Avatar
Registered User
 
Joined: Jun 2010
Posts: 96
Likes: 0
From: central il.
yes, with way it is now get 35 lbs boost on wot. never had it over 1200 no matter how hard i pushed it. i think if i had good t/c i would have problems but dont know? it doesn't blow bunch of smoke so either i got it set up good or not getting full load on motor because t/c. i going to keep driving it just like it is till i want more go pedal.
Reply
Old Jan 26, 2011 | 09:15 PM
  #8  
d-rod's Avatar
Registered User
 
Joined: Jun 2010
Posts: 96
Likes: 0
From: central il.
not saying i wouldn't enjoy a set of twins and i nice trans. but got bills to pay and i ride my bike mar. till nov. so just going to be content.
Reply
Old Jan 26, 2011 | 09:17 PM
  #9  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
Originally Posted by d-rod
yes, with way it is now get 35 lbs boost on wot. never had it over 1200 no matter how hard i pushed it. i think if i had good t/c i would have problems but dont know? it doesn't blow bunch of smoke so either i got it set up good or not getting full load on motor because t/c. i going to keep driving it just like it is till i want more go pedal.
so you think i will have problems with my setup and the 75hp's when i get my tranny built?
Reply
Old Jan 26, 2011 | 09:32 PM
  #10  
d-rod's Avatar
Registered User
 
Joined: Jun 2010
Posts: 96
Likes: 0
From: central il.
with the 215 motor, zero plate and tight trans and t/c you will be putting in more fuel then me, prob a bunch more. if it was my truck just cruising most of the time i'd roll with it and watch the gauge and go pedal. if your going to be pulling anything bigger then a geo i'd spring for a bigger turbo of some flavor. i think you be happier in long run with it, and your motor might too. thats my two cents. you have one nice looking truck that will run even better when you get done wish it was mine.
Reply
Old Jan 27, 2011 | 05:46 AM
  #11  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
thanks d-rod i appreciate that, i will prob go for it and just do the turbo some other time i really want to throw some sticks at it
Reply
Old Feb 2, 2011 | 01:23 PM
  #12  
HOHN's Avatar
Registered User
 
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
I'm running mach 4s with the stock charger.

I have been since July 2006 without problem.
Reply
Old Feb 5, 2011 | 01:01 PM
  #13  
firgod4's Avatar
Thread Starter
Registered User
 
Joined: Oct 2008
Posts: 350
Likes: 0
From: Michigan
well what numbers are you guys putting down with these injectors with the stock charger?
Reply
Old Feb 7, 2011 | 05:40 PM
  #14  
d-rod's Avatar
Registered User
 
Joined: Jun 2010
Posts: 96
Likes: 0
From: central il.
no idea about power never had chance to dyno. their is more power but converter is weak now so it would be waste of time. sorry no help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gablekevin
3rd Gen High Performance and Accessories (5.9L Only)
1
Sep 19, 2006 12:12 AM
kawi600
Performance and Accessories 2nd gen only
10
Jan 26, 2006 10:19 AM
G-NOTE
24 Valve Engine and Drivetrain
3
Sep 1, 2005 06:36 PM
oscaroc
Performance and Accessories 2nd gen only
7
Apr 2, 2005 12:14 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:34 AM.