HELP!!!!! NEED HELP IN TEXAS 2 fab for twins
#1
Registered User
Thread Starter
Join Date: Oct 2005
Location: Blanket TX--Odessa TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
HELP!!!!! NEED HELP IN TEXAS 2 fab for twins
I just bought an HT3B and am ready to fab up the twins so if theres anybody out there close to BROWNWOOD TX FOR THAT MATTER ANYWHERE IN TEXAS, get back to me I could use all the help and advice i can get i also need help from all the other members to find adjustable wastegate, blowoff valves etc.....
Jake
Jake
#6
Registered User
Thread Starter
Join Date: Oct 2005
Location: Blanket TX--Odessa TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gunracer1
what do you need help on?
gunracer im at work right now but ill call u tomorrow sometime before three
thanks
Jake
#7
Registered User
Join Date: Feb 2003
Location: Gatesville, TX
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
You wouldnt happen to have a red 1st gen would you? I saw a red one with stacks in front on the tint place on hwy 84 one day in Brownwood...nice truck. If you are building twins for a 1st gen, check out my gallery...may give you some ideas on possible designs.
Cody
Cody
Trending Topics
#9
Registered User
Thread Starter
Join Date: Oct 2005
Location: Blanket TX--Odessa TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NeedMoPower
You wouldnt happen to have a red 1st gen would you? I saw a red one with stacks in front on the tint place on hwy 84 one day in Brownwood...nice truck. If you are building twins for a 1st gen, check out my gallery...may give you some ideas on possible designs.
Cody
Cody
#10
Registered User
Join Date: Jan 2002
Location: Milner, Georgia
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
If you're ready to step up , you had better walk very slowly if you don't know how to fab the twins. It ain't that easy and certain things will not be best for their operation. It's more than just sticking 2 turbos together. The wrong help won't do you any good, either. I've seen a 45 hp loss on two different setups.
..Preston..
..Preston..
#11
Registered User
Join Date: Jul 2004
Location: WEST MICHIGAN
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
step up and tuning??
If you go with a set of turbos that is commen and often used, how could it not yield the same as the next guys?? The tuning - what do you tune - is their 1 or 2 blow off valves and then a wastegate or ???
Sorry just trying to make more sense of it. Don't get me wrong I know it would be hard - heck pictures is all I have ever seen of twins, but they look fairly easy to make if you can fabricate??
Thanks alot and not trying to hijack just trying to add - constructively!!
Sorry just trying to make more sense of it. Don't get me wrong I know it would be hard - heck pictures is all I have ever seen of twins, but they look fairly easy to make if you can fabricate??
Thanks alot and not trying to hijack just trying to add - constructively!!
#12
Registered User
Join Date: Jan 2002
Location: Milner, Georgia
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
1. What has been done internally to the housings
2. How long is the exhaust housings connector pipe
3. Wastegates are a good concern. Where are they set?
4. What brand are they. They all spool differently.
5. This is just 4 things , there are many.
C, y'all
2. How long is the exhaust housings connector pipe
3. Wastegates are a good concern. Where are they set?
4. What brand are they. They all spool differently.
5. This is just 4 things , there are many.
C, y'all
#13
Registered User
Thread Starter
Join Date: Oct 2005
Location: Blanket TX--Odessa TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
i'm keeping my hx35 (for now) and the other is a Holset HT3B, i havn't decided on what blow off valves and or external wastegates im going to use, but for now i just want to run about 40-50lbs of boost and then move up from there, after i get machine work done on the head and block of course, so are there any suggestions on wastegates or blowoff valves? i ordered all the pipe today to start fabbing up the twins (should be in on tuesday) ill keep y'all updated, and all suggestions are welcome
Thanks
Jake
Thanks
Jake
Thread
Thread Starter
Forum
Replies
Last Post
Stock 02
Performance and Accessories 2nd gen only
28
09-24-2006 11:09 AM