i got a 241 dhd t-case for my truck witch had a 241 dld on it and i am haveing a problem. the input shaft on the DHD is longer then the DLD. what can i do. should i cut it down or replace the output shaft on my tranny.

 

You need to swap the input gears i believe, their the same spline right?

 

ya they are the same spline. so i can swap them from t-case to t-case.

 

Yeah their not real complicated, just take your time when taking them apart and look at how everthig is assembled, youll need some snap ring plyers and a set of plyers that open not clamp will be helpful with the other rings that aren't snap ring style.

Brett

 

then what is the differents with the dhd and the dld besides the pto option.

 

The NV241D is a heavier duty Dodge version of the 241, with a larger input shaft and larger bearings to withstand the torque of the V10 and diesel engines.

The NV241HD, an option on Ram 2500's and standard on Ram 3500's built after 1998, has a stronger case and wider drive chain to better withstand the shock of snow plow service, a PTO cover and drive gear, and an extra bearing to support the thrust to the main shaft created by a PTO adapter.

 

good. ya i blew my DLD 5 months ago so i know how to take the apart and put them back together. i blew the cases apart. not fun.

 

so what is the spline on the nv241hd input gear?