I've got Auto Meter Ultra Lite in EGT and Trans. Temp. Still have to get the boost, but I've tested both with one of those infrared temp guns, and they were DEAD ON. Plus, just personal preference, I think they look better Easy to install, too.

 

Enterprise Engine sells 100psi Dipricols.

 

I've got DiPricol white faced gauges (boost/egt) and they are great. Easy viewing in the day, easy viewing at night. I'm surprised so few people have them around here (seemingly)

 

Just use an oil pressure gauge. Most are 100 psi.

 

Thanks to all for the input on the 100PSI gauges! I like the ISSPRO EVs (my current FP gauge). I'll try an ISSPRO oil pressure guage first and if I don't like it, I'll get a DiPricol.

brandon.

 

Thanks for all the input gents.Well let u know of the out come

 

Amartinson,
The FP (0-15psi) on eguages.com is P/N: ATM-4313 with the isolator for $112.90...that's in the Ultra Lite Series.

 

I've had dakota digitals for a while now and just recently replaced them with ISSPRO mechanicals after replacing the electric senders 3 different times.

 

I run the X-Monitor. One year no probs. Easy to read and I like the "alarm" settings.

 

That's just great!! I put the AutoMeter Electrical Fuel Press guage in the other day along with the banjo bolts. When I bumped the starter the first two times I got a fuel pulse up to about 6psi. The next few times it slowly ramped down to 0 psi. Got the truck started and still 0 psi. I'm sitting there thinking that the fuel pump bit the dust trying to prime the system. Now I'm reading that the new expensive guage I bought might be a P.O.S. I'm putting my boost pump in this evening and hope to get some head pressure. If not, I home Summit Racing has a good return policy. Does anyone know of an ISSPRO model that would match close to the Autometer Pro-Comp Ultra-Lite series meters?

 

Something to remember with the boost gauge is, that you wont see boost while sitting in the driveway reving the engine.
Ya gotta get it on the road, and punch it.

Ed