i know the fuel plate arm starts at the bottom and goes up. How far up does it go? by the look of these plates would i be right to assume about 1/2 way?

 

Arm travel can vary

If ur plate is in the stock position it might get up to about 1/2 way, if ur plate is full forward, u could risk goin under the plate, or at the best, just at the very nose of the plate, As is with my 100 plate at the moment... If u have the plate all the way back, it might hit farther up as well..

However if u must, u can adjust the governer arm to get it to hit where u want it to...

Instructions are here..

http://cumminsdatabase.com/read.php?id=29

Hope this helps

Rick