Well, today at our dowel pin massacre, we took a look at my fuel plate. First off, the timing has been modified, and the fuel plate has been slid forward. The number on the plate is 24009. Any ideas on stock or aftermarket? What is some other evidence of modification? amartinson will post a pic of it, for better reference.

Thanks

 

Here's the pic:

 

Thanks for posting, Andy.

Going by this pic of a TST plate and a stock one, mine might be stock? There are the 2 screws, and 2 unoccupied holes in the plate. Also, the TST doesn't have a number on it. What do you guys think?

 

I am pretty sure that is a stock plate.

 

that plate with the extra holes and screws/rivets? is not a OE plate.

 

it is a stock plate, but we need a profile shot of it so see if it has been modded.

 

Anyone have a pic of a #12 or #11 TST plate? I have a stock plate that was ground a few months back, but my performance hasn't increased significantly. Also, my fuel consumption has gone through the roof!

 

The plate with the rivets looks just like my stock plate - It's actually a two piece plate. I can't tell what number plate the TST is. Mine (TST) has numbers engraved on the top... 4.8 = #4?? Quickly looking at the picture, I would guess it is a higher number plate because the cut just beyond the nose doesn't look to be very deep past vertical. Just a guess though...

 

Yep, it is a stock plate. TST emailed me back and said that the number matches stock plates used, so that's good to know. Thanks all for helping me out.