I was thinking a low fuel pressure light would not be a bad idea even if a fuel pressure gauge is used. Gauges are sometimes ignored and not watched closely and sometimes people other than the one paying the bill is at the reins.
Anyone know what parts are needed and how to install one without buying a $50.+ kit ?

 

I made my own. LED light from Radio Shack a few fittings and a sending unit from NAPA. I don't remeber the part # for the sending unit, but I believe the pressure range was 4-7. My local NAPA had a book with all the different sending units with the specs listed, we just looked throught that until I found what I wanted. I saved the SU box, so I will look and see what the part # was and let you know.

 

Oh yeah, I think I had like $22 in all the parts for it.

 

All you need is the NAPA part mentioned above and hook it to your parking brake light for a real inexpensive set up.

 

LOL, it took me a second to figure that out. I think the LED light from Radio Shack was like 3 or 4 bucks. I drilled a hole (1/4" i think) in my a-pillar pod and mounted it at eye level cause my FP gauge is down by the ashtray. Figured I would see the light first if sumthin went wrong.

 

Gage, Light & BUZZER.... I'm Old...

working on small hammer to hit me up side head....

 

ebay has one for I thing $27 with the shipping all the parts included. ED

 

Id here that buzzer once, pull over and tear the dash apart looking for the sound to kill it! A hammer though....not a bad idea

 

ya, but it got you to pull over,,,

oh, the buzzer is hooked to the low OIL pressure sw also.

That was the original intent, added the fuel press as an after thought...

 

I think the buzzer idea is good also, If you could hear. Too bad I can't. Thanks for the help and ideas.
That part # would be great hink. please post or pm me.
Thanks again.