seabee

i am looking at a set of bd twins . i was wanting to see what people that have them tought about them . also what size injectors to run with them

Rhino

I guess there are not too many people running BD's twins?

600 Megawatts

BD is not one of the 'CULT' vendors around here thats all. Plus you have lots of guys who think their top turbo is too small.... But they are neglecting the increase in density created by the pressure increase from the bottom turbo when they make that statement.... long story.... there has allready been a heated debate on this one....

Bottom line, your best bet is to build you own set... if you dont own a welding machine, you can buy one and have it paid off with the difference between store bought twins and your own.. then have the welder the rest of your life.....

HT3B with 26cm housing bottom turbo, ebay $100 or less
your existing HX35 with 16cm housing top turbo $175 or less for housing... ATS manifold $450, some sch 10 elbows, tubing, a good old fasioned tape measure and grease pencil, some busted knuckles and burnt forarms and its done for under $1,000 and you have the satisfaction of saying you did it YOUR WAY..

Barring that, the BD twins are the best deal in store bought twins....


Kevin

Rhino

I have been looking for an HT3B for a long time and unfortunately I have yet to come across one for that cheap and the problem is it seems like the cheapest ones I find, which were around $200, do not have the 26cm exhaust housing.

I wish I could find one of those $100 deals

Jim Shulmister

How about this one? http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
-Jim-

Rhino

Not quite $100 but still a pretty good price. It looks to be a little bigger than a 26 housing, more like a 32 or maybe even a 36. I wonder what housing it was?