I was just wonderin , you guys using fass if the fuel line runs to the stock dodge filter or if you just do away with it and go straight to the I.P ? I'm sure you do away with the L P right?

 

Mine is straight from the FASS pump w/filter's to the VP44. I've went to -35 with no problem!!! Love the FASS...

 

Yea, that's what I was thinkin. Just use the filters on the FASS and go straight to the pump

 

I am using the factory water/fuel seperator still. Probably a little redundant to use it since the fass comes with an inline filter, but that's ok with me. I just have the pump though, not the whole "system". Not sure which one you are using. If the system (FASS II) comes with a water/fuel seperator that wires into the in dash sensor, then I guess it would be ok to bypass the factory unit. My .02

 

I ran mine through the stock filter/seperator at first but ended up having to bypass it later as the added fuel pressure pushed the drain valve open and leaked fuel.
Joe

 

Same here!