de-torque
12-07-2004, 02:53 PM
#16
Registered User
Join Date: Aug 2003
Location: Jeffersonville, Ohio
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
I was typing while you were
The website for tha MAD ECM is Advanced Diesel Technology, you can find it in the links section, or if you're lazy, here it is:
http://www.smokindiesel.com
Good Luck,
Chris
The website for tha MAD ECM is Advanced Diesel Technology, you can find it in the links section, or if you're lazy, here it is:
http://www.smokindiesel.com
Good Luck,
Chris
12-07-2004, 03:06 PM
#18
Registered User
Thread Starter
Join Date: Aug 2004
Location: stockton, ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
i just got off the phone with advanced diesel and the mad ecm will not take care of the de-fuel, it might help but wont get rid of it. so it looks like the only way is to get the RAD from BD.
12-07-2004, 03:17 PM
#19
Registered User
What boost numbers do you run with your tuck- what other mods etc?
Just curious.
I have very good experience with launching only at about 7 psi of boost- the turbo will come up nicely and always controllable to keep traction. I do not have billet shafts, and I wouldn't want to ruin my tranny so I keep my boost way down. OTOH I still have to keep my foot out of it until in 2nd gear to avoid fishtailing- any more boost at launch would be useless to me IMHO
AlpineRAM
Just curious.
I have very good experience with launching only at about 7 psi of boost- the turbo will come up nicely and always controllable to keep traction. I do not have billet shafts, and I wouldn't want to ruin my tranny so I keep my boost way down. OTOH I still have to keep my foot out of it until in 2nd gear to avoid fishtailing- any more boost at launch would be useless to me IMHO
AlpineRAM
12-07-2004, 04:04 PM
#21
Registered User
Thread Starter
Join Date: Aug 2004
Location: stockton, ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by AlpineRAM
What boost numbers do you run with your tuck- what other mods etc?
Just curious.
I have very good experience with launching only at about 7 psi of boost- the turbo will come up nicely and always controllable to keep traction. I do not have billet shafts, and I wouldn't want to ruin my tranny so I keep my boost way down. OTOH I still have to keep my foot out of it until in 2nd gear to avoid fishtailing- any more boost at launch would be useless to me IMHO
AlpineRAM
What boost numbers do you run with your tuck- what other mods etc?
Just curious.
I have very good experience with launching only at about 7 psi of boost- the turbo will come up nicely and always controllable to keep traction. I do not have billet shafts, and I wouldn't want to ruin my tranny so I keep my boost way down. OTOH I still have to keep my foot out of it until in 2nd gear to avoid fishtailing- any more boost at launch would be useless to me IMHO
AlpineRAM
max boost i get is about 30 psi. i also have 4" exhaust and propane. the truck will not fishtail at all because the engine will de-fuel and lose power till about 2nd gear. i dont power brake to 20 psi, just standing on the throttle off the line. Gary
it has not been to the track yet.
12-07-2004, 05:06 PM
#23
Registered User
Thread Starter
Join Date: Aug 2004
Location: stockton, ca
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: yj
Originally posted by rjohnson
Sorry for all the (my) misunderstanding!
My truck has never defueled off the line WITHOUT powerbraking. Just assumed you were doing that.
RJ
Sorry for all the (my) misunderstanding!
My truck has never defueled off the line WITHOUT powerbraking. Just assumed you were doing that.
RJ
no problem. if i power brake at all it wont go over 1900 rpm.
12-08-2004, 01:20 AM
#24
Registered User
hmm- only 30 # boost sounds a tad low to me. This shouldn't be the reason for your defueling off the line, but with a comp and big injectors I think you should really be up in the 35-40# range.
Maybe this is caused by some other problem you have now and where a good session with the DRB scantool and looking at the output of the sensors could help a bunch.
What EGTs do you run?
Justponderingwhyan01woulddefuelwithoutpowerbraking
AlpineRAM
Maybe this is caused by some other problem you have now and where a good session with the DRB scantool and looking at the output of the sensors could help a bunch.
What EGTs do you run?
Justponderingwhyan01woulddefuelwithoutpowerbraking
AlpineRAM
Thread
Thread Starter
Forum
Replies
Last Post
mitm
24 Valve Engine and Drivetrain
4
08-16-2009 09:29 PM
Firstgenfanatic
1st Gen. Ram - All Topics
11
05-14-2008 06:17 PM
PapaSmurf
3rd Gen High Performance and Accessories (5.9L Only)
3
12-19-2003 02:14 PM
Davidp
Performance and Accessories 2nd gen only
1
02-01-2003 05:49 AM