Could I spin This?
#1
Could I spin This?
I have an HT3B that I bought off this guy and it came with a 32cm housing and a 23cm housing. Would the 23cm housing be good as a single turbo or would it be too laggy and not good spooling at all?
#2
Registered User
I wouldn't run it as a single. That's a big turbo to be driving on the street. If it were a pull truck only I'd try it. It would be a good bottom turbo in a set of twins.
#3
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
What tweaks you running in the P7100 pump? I would run at least 5k gsk or more, so you get abit of useable rpm on the turbo.
I think that turbo would work better as a primary turbo in a set of twins under your 64mm. I would find a different turbo that has a smaller turbine housing. That turbo is going to be a laggy beast and smokey.
I think that turbo would work better as a primary turbo in a set of twins under your 64mm. I would find a different turbo that has a smaller turbine housing. That turbo is going to be a laggy beast and smokey.
Thread
Thread Starter
Forum
Replies
Last Post
USMC64-70
12 Valve Engine and Drivetrain
4
11-10-2002 02:59 PM