20 psi boost and then heavy black smoke :(
Registered User
Joined: Jul 2008
Posts: 148
Likes: 0
From: Concord, NC
you'll need studs. or some guys have good luck with torquing down the factory head bolts with about 55psi. i have pop-offs on mine that open around 48psi. can you tell where the grinding is coming from?
Thread Starter
Registered User
Joined: Sep 2008
Posts: 311
Likes: 0
From: Latham, Missouri and now Goshen, Indiana
it comes from the turbo side of the engine. an its a light grinding. kinda hard to explain the sound.
Thread Starter
Registered User
Joined: Sep 2008
Posts: 311
Likes: 0
From: Latham, Missouri and now Goshen, Indiana
also today on the way home from work i cranked my tst to level 9 and romped it and it went up past 30 lb boost an wasnt actin up.. i dunno wat the deal is..
Thread Starter
Registered User
Joined: Sep 2008
Posts: 311
Likes: 0
From: Latham, Missouri and now Goshen, Indiana
yea me too. like i say the turbo has a lil up and down play but when i spin it it sounds fine... but i dont believe the shaft play is excessive. id say its normal for a truck with 275k on it. lol
Registered User
Joined: Sep 2007
Posts: 16
Likes: 0
From: Neola Utah
As for the bost drop my did the same thing. I was sucking my air filter closed. Change or clean out your filter and then try it.
I have had a turbo go out. pull off your intake and watch it, have some one run the throttle and see. Take a piece of metal pipe and place it on the intake side of the turbo and put your ear to the tube (place it on the housing) and listen. Then do the same on the exaust side. Have someone run the throttle up so you can listen.
if it is rubbing you wil hear it.
I have had a turbo go out. pull off your intake and watch it, have some one run the throttle and see. Take a piece of metal pipe and place it on the intake side of the turbo and put your ear to the tube (place it on the housing) and listen. Then do the same on the exaust side. Have someone run the throttle up so you can listen.
if it is rubbing you wil hear it.
Thread Starter
Registered User
Joined: Sep 2008
Posts: 311
Likes: 0
From: Latham, Missouri and now Goshen, Indiana
ok hears an update. it was doin it again today. i really think its my wastegate, because when it gets to 20 lbs it drops down to 5. and then when i let off throttle it jumps back up to 10 lbs before it goes down to 0. could it be my wastegate actin up? i think i pretty much ruled out the turbo as the shaft play is not excessive and it spins freely.
