12.08 @ 113 mph
12.08 @ 113 mph
In Rockingham July 19th at our Division 2 race I ran two passes of 12.08 @ 113mph in the Garmon Dakota. Testing the track for traction, I ran 12.9, 12.5, 12.3, 12.08 then never ran slower than 12.1 until we started racing. The 28" Street ET's are killing my top end, I need more tire. My 60ft still is not up to par at a high 1.8 to low 1.9 and my 1/8 mile is a 7.7 @ 91mph. <br><br>Jeff has done an awesome job tuning this engine. Still running mostly junk parts. Stock HX40, 370's, Jeff's pump mods. No O-ring head or anything fancy. Last dyno run was 467/913 and I added another 20-30hp before Rockingham but have not proved that on the dyno yet. <br><br>Jeff broke his tranny on his first launch. Was off to a good pass when he snapped one of the shafts probably at about the 500ft mark. He turned a 6.9 at 90 mph in the 1/8th and a 12.33 @ 77mph coasting out the end. His 10.70 passes are 6.8's at 102 in the 1/8 so I am hoping he would have made a 10.50 or so pass had he held together. What is really wild is if Jeff did snap an input or output shaft, it will be his first one. <br><br>So, my goal of 12.00 in the Dakota, drug free, one Hx40 is within reach, the DRIVER just needs to get the rest of the HP to the track.<br><br>
Re:12.08 @ 113 mph
[quote author=Scotty link=board=7;threadid=17398;start=0#162776 date=1058897202]<br>Dave, thats a bit laggy isn't it?<br><br>
<br>[/quote]<br><br> ;D What I really need is a custom Scotty for the Dakota to get it some cooOooOoooL air. 8)
<br>[/quote]<br><br> ;D What I really need is a custom Scotty for the Dakota to get it some cooOooOoooL air. 8)
Re:12.08 @ 113 mph
[quote author=DavidTD link=board=7;threadid=17398;start=0#162778 date=1058897763]<br>[quote author=Scotty link=board=7;threadid=17398;start=0#162776 date=1058897202]<br>Dave, thats a bit laggy isn't it?<br><br>
<br>[/quote]<br><br> ;D What I really need is a custom Scotty for the Dakota to get it some cooOooOoooL air. 8)<br>[/quote]<br><br>Send me some pix and dimensions if you REALLY want to suck COOOooOoooOoooooOoooL AIR.<br>
<br><br>Check yer PM's
<br>[/quote]<br><br> ;D What I really need is a custom Scotty for the Dakota to get it some cooOooOoooL air. 8)<br>[/quote]<br><br>Send me some pix and dimensions if you REALLY want to suck COOOooOoooOoooooOoooL AIR.<br>
<br><br>Check yer PM's
Thread
Thread Starter
Forum
Replies
Last Post
SSV1761982
24 Valve Engine and Drivetrain
10
Apr 12, 2013 06:44 AM
jgiachino
3rd Generation Ram - Non Drivetrain - All Years
14
Aug 31, 2009 06:48 PM
Mark Hodowanec
3rd Generation Ram - Non Drivetrain - All Years
4
Nov 10, 2004 06:41 PM




